P0AE9 2015 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 4 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AE9 2015 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 4 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AE9 2015 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0AE9 2015 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AE9 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AE9 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AE9 2015 Chevrolet Silverado code?
Need more information on how to fix the P0AE9 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AE9 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AE9 2015 Chevrolet Silverado Code
What does the OBDII code P0AE9 mean on a 2015 Chevrolet Silverado?
The P0AE9 code indicates an issue with the Hybrid/EV Battery Temperature Sensor 4, specifically that it is not performing within expected parameters.
What are the common symptoms of the P0AE9 code?
Common symptoms include an illuminated check engine light, reduced hybrid or EV battery performance, poor fuel efficiency, and potentially limited driving range.
What causes the P0AE9 code to appear?
Possible causes include a faulty battery temperature sensor 4, wiring or connector issues, or problems within the hybrid/EV battery management system.
Can I drive my 2015 Silverado with the P0AE9 code?
It is not recommended to drive the vehicle extensively with this code, as it may lead to further battery issues or reduced performance. Get the issue diagnosed and repaired promptly.
How do I diagnose the P0AE9 code?
Diagnosis typically involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors for damage, and testing the sensor’s functionality using a multimeter.
How much does it cost to repair the P0AE9 code?
The repair cost varies, but replacing the battery temperature sensor usually costs between $100 and $300, depending on labor rates and parts availability.
Can a software update resolve the P0AE9 code?
In some cases, a software update for the battery management system may resolve the issue, but hardware inspection is necessary to rule out sensor or wiring faults.
What happens if the P0AE9 code is ignored?
Ignoring the P0AE9 code can result in diminished hybrid system performance, potential battery overheating, and further damage to the vehicle's hybrid/EV battery.
How can I prevent the P0AE9 code from recurring?
Regular maintenance, keeping the hybrid/EV battery system clean, and promptly addressing wiring or connector issues can help prevent this code from reappearing.
Does the P0AE9 code always mean the temperature sensor is bad?
No, the issue could also stem from damaged wiring, connector corrosion, or a fault in the battery control module. Proper diagnostics are essential.
Discuss the causes and fixes for P0AE9 2015 Chevrolet Silverado OBDII Code
Code P0AE9 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
