P0AE9 2014 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 4 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AE9 2014 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 4 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AE9 2014 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0AE9 2014 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AE9 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AE9 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AE9 2014 GMC Sierra code?
Need more information on how to fix the P0AE9 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AE9 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AE9 2014 GMC Sierra Code
1. What does the OBDII code P0AE9 mean on a 2014 GMC Sierra?
It indicates an issue with the Hybrid/EV Battery Temperature Sensor 4, specifically a performance problem where the sensor is not operating within expected parameters.
2. What are the symptoms of a P0AE9 code in a 2014 GMC Sierra?
Common symptoms include reduced hybrid system performance, possible warning lights on the dashboard, and limited functionality of the electric drive system.
3. What causes the P0AE9 code to appear?
The code can be triggered by a faulty temperature sensor, damaged wiring or connectors, a malfunctioning hybrid battery management system, or an overheating battery.
4. Is the P0AE9 code serious?
Yes, it should be addressed promptly as it could indicate battery overheating or other issues that may lead to reduced vehicle performance or potential damage to the hybrid system.
5. How do you diagnose a P0AE9 code?
Technicians typically use a scan tool to confirm the code and inspect the Hybrid/EV battery temperature sensor, wiring, and connectors for damage or irregular readings.
6. Can I drive with a P0AE9 code on my 2014 GMC Sierra?
Driving with this code is not recommended, as it could lead to further damage to the hybrid battery system or reduced vehicle performance.
7. How do you fix a P0AE9 code?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring or connectors, or recalibrating the hybrid battery management system.
8. How much does it cost to repair a P0AE9 code?
The repair cost will vary depending on the issue, but replacing a temperature sensor typically costs $100–$300, while more extensive wiring or battery-related repairs may be higher.
9. Can a P0AE9 code be caused by environmental factors?
Yes, extreme heat or cold can sometimes cause the sensor to give inaccurate readings, potentially triggering the code.
10. Does the P0AE9 code require a software update?
In some cases, a software update or reprogramming of the hybrid battery control module may be necessary to resolve the issue.
Discuss the causes and fixes for P0AE9 2014 GMC Sierra OBDII Code
Code P0AE9 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
