P0AE9 2014 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 4 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AE9 2014 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 4 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AE9 2014 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0AE9 2014 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AE9 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AE9 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AE9 2014 Chevrolet Silverado code?
Need more information on how to fix the P0AE9 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AE9 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AE9 2014 Chevrolet Silverado Code
1. What does the OBDII code P0AE9 mean on a 2014 Chevrolet Silverado?
The P0AE9 code indicates an issue with Hybrid/EV Battery Temperature Sensor 4, specifically related to its performance or functionality.
2. What are the common symptoms of a P0AE9 code in a 2014 Chevrolet Silverado?
Symptoms may include an illuminated check engine light, reduced hybrid system performance, overheating of the battery, or limited power output.
3. What causes the P0AE9 code to appear?
Causes can include a faulty battery temperature sensor, damaged wiring or connectors, a malfunctioning hybrid battery pack, or an issue with the vehicle's hybrid control module.
4. How do I diagnose a P0AE9 code on my Silverado?
Start by scanning the vehicle for additional codes, inspecting the battery temperature sensor, testing the wiring and connectors, and verifying the sensor’s performance against specifications.
5. Can I drive my 2014 Silverado with a P0AE9 code?
It is not recommended, as this code may indicate a problem with battery temperature regulation, which could lead to overheating or reduced hybrid system efficiency.
6. How is the P0AE9 code repaired?
Repairs may involve replacing the faulty temperature sensor, repairing damaged wiring or connectors, recalibrating the hybrid control module, or servicing the hybrid battery pack.
7. How much does it cost to fix a P0AE9 code on a 2014 Chevrolet Silverado?
Repair costs can vary but typically range from $150 to $500, depending on whether the battery sensor, wiring, or other components need to be replaced.
8. Can a P0AE9 code damage the hybrid battery in my Silverado?
If left unaddressed, improper temperature monitoring can lead to overheating, potentially causing damage to the hybrid battery over time.
9. Is the Hybrid/EV Battery Temperature Sensor 4 a common failure point on the 2014 Silverado?
While not a widespread issue, temperature sensors can fail due to wear, corrosion, or electrical problems, especially in older hybrid vehicles.
10. Do I need special tools to fix the P0AE9 code?
Yes, diagnosing and repairing this code often requires a professional OBDII scanner, multimeter, and, in some cases, specialized tools for accessing the hybrid battery system.
Discuss the causes and fixes for P0AE9 2014 Chevrolet Silverado OBDII Code
Code P0AE9 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
