AutoCodes – Cadillac – P0AE7 Cadillac

P0AE7 Cadillac Code - Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage

Quick Answer

The hybrid battery system voltage is controlled by two high voltage contactors. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0AE7 Cadillac indicates Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage.
Common causes: Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 645

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0AE7 Cadillac Description

The hybrid battery system voltage is controlled by two high voltage contactors. The high voltage contactors allow the high voltage DC batteries to be connected to the vehicle or safely contain the high voltage DC within the Hybrid/EV Battery Pack assembly. Of the two contactors, one is a pre-charge contactor and the other is the primary contactor. The two contactors are closed in a specific sequence by the Starter/Generator Control Module. The pre-charge contactor is closed first. This causes high voltage to flow through the pre-charge resistor, allowing system voltage to build slowly. Once the system voltage has raised and stabilized, the primary contactor is closed. Both contactors are controlled by the Starter/Generator Control Module. The Starter/Generator Control Module supplies B+ to each contactor at all times. When the contactors are to be closed, the Starter/Generator Control Module will provide a ground to the contactor through a low side driver.

OBDII Code P0AE7 Cadillac - Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage - AutoCodes.com — P0AE7 Cadillac Code - Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0AE7 Cadillac?

Faulty Starter/Generator Control Module
Starter/Generator Control Module harness is open or shorted
Starter/Generator Control Module circuit poor electrical connection

How to Fix the DTC P0AE7 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0AE7 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0AE7 Cadillac code?

Need more information on how to fix the P0AE7 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0AE7 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0AE7 Cadillac Code

1. What are common symptoms of OBDII code P0AE7 in a Cadillac hybrid/EV?

- Common symptoms include the Check Engine light illuminating, decreased fuel efficiency, and potential drivability issues.

2. What causes the Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage fault code in a Cadillac?

- This code is usually triggered by a fault in the precharge contactor control circuit, such as a short circuit, open circuit, or high voltage condition.

3. How serious is the P0AE7 fault code in a Cadillac hybrid/EV?

- This fault code should be addressed promptly to prevent further damage to the hybrid/EV battery system and ensure optimal vehicle performance.

4. Can I continue driving my Cadillac with the P0AE7 trouble code present?

- It is not recommended to continue driving with the P0AE7 code active, as it may lead to further issues with the hybrid/EV system.

5. How can I diagnose the Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage issue in my Cadillac?

- A professional diagnosis using a diagnostic scanner capable of reading hybrid/EV system codes is recommended to pinpoint the exact cause of the problem.

6. Are there any DIY repair tips for addressing the P0AE7 fault code in a Cadillac?

- DIY repairs for this code are not recommended due to the complex nature of hybrid/EV systems. It is best to seek assistance from a qualified technician.

7. What is the typical cost to repair the Hybrid/EV Battery Precharge Contactor Control Circuit fault in a Cadillac?

- Repair costs can vary depending on the exact cause of the issue, but it is advisable to budget for potentially significant expenses due to the specialized nature of hybrid/EV repairs.

8. Can a regular automotive repair shop fix the P0AE7 code in a Cadillac hybrid/EV?

- Not all automotive repair shops are equipped to handle hybrid/EV system repairs. It is best to seek out a shop or dealership with experience in hybrid vehicle maintenance.

9. How often does the Hybrid/EV Battery Precharge Contactor Control Circuit High Voltage fault occur in Cadillac vehicles?

- While not extremely common, this fault can occur in Cadillac hybrid/EV models, especially as the vehicles age and components wear out.

10. Is it possible to prevent the OBDII code P0AE7 from recurring in my Cadillac hybrid/EV?

- Regular maintenance and inspections of the hybrid/EV system can help prevent issues like the P0AE7 code from recurring. Promptly addressing any warning lights or symptoms is key to preventing further problems.