AutoCodes – Toyota – P0ADB Toyota

P0ADB Toyota Code - Hybrid Battery Positive Contactor Control Circuit Low

Quick Answer

The SMRs (System Main Relays) connect and disconnect the high-voltage power supply circuit in accordance with requests from the HV control ECU. Common causes include Faulty System Main Relay, System Main Relay harness is open or shorted, System Main Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0ADB Toyota indicates Hybrid Battery Positive Contactor Control Circuit Low.
Common causes: Common causes include Faulty System Main Relay, System Main Relay harness is open or shorted, System Main Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,464

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0ADB Toyota Description

The SMRs (System Main Relays) connect and disconnect the high-voltage power supply circuit in accordance with requests from the HV control ECU. To ensure a reliable operation, they consists of a total of 3 relays (1 for the negative side and 2 for the positive side).
To connect, SMR1 and SMR3 turn ON initially. Then, SMR2 turns ON and SMR1 turns OFF. This process protects the circuit from the high-voltage surge current by allowing the limit current to flow via the resistor.
To disconnect, SMR2 and SMR3 turn OFF in that order. The HV control ECU checks that the relays have turned OFF properly.
The HV control ECU monitors the proper operation of the SMRs (CON1, CON2 and CON3) to check for a malfunction.

OBDII Code P0ADB Toyota - Hybrid Battery Positive Contactor Control Circuit Low - AutoCodes.com — P0ADB Toyota Code - Hybrid Battery Positive Contactor Control Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0ADB Toyota?

Faulty System Main Relay
System Main Relay harness is open or shorted
System Main Relay circuit poor electrical connection
Faulty HV control ECU

How to Fix the DTC P0ADB Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0ADB Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0ADB Toyota code?

Need more information on how to fix the P0ADB Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0ADB Toyota code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.