P0AD9 LEXUS - Hybrid Battery Positive Contactor Control Circuit/Open
P0AD9 LEXUS Possible Causes
- Faulty System Main Relay
- System Main Relay harness is open or shorted
- System Main Relay circuit poor electrical connection
- Faulty HV control ECU
How do I fix code P0AD9 LEXUS?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0AD9 LEXUS code
Labor: 1.0The cost of diagnosing the P0AD9 LEXUS code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P0AD9 LEXUS DescriptionThe SMRs (System Main Relays) connect and disconnect the high-voltage power supply circuit in accordance with requests from the HV control ECU. To ensure a reliable operation, they consists of a total of 3 relays (1 for the negative side and 2 for the positive side).
To connect, SMR1 and SMR3 turn ON initially. Then, SMR2 turns ON and SMR1 turns OFF. This process protects the circuit from the high-voltage surge current by allowing the limit current to flow via the resistor.
To disconnect, SMR2 and SMR3 turn OFF in that order. The HV control ECU checks that the relays have turned OFF properly.
The HV control ECU monitors the proper operation of the SMRs (CON1, CON2 and CON3) to check for a malfunction.
More InformationNeed more information on how to fix the P0AD9 LEXUS code?
Get Access to Factory Service Manuals
Need more help?Get the P0ad9 Lexus code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0ad9 Lexus code? Have you replaced any parts?
Any information is appreciated. Thanks