P0ACE Buick Code - Hybrid/EV Battery Temperature Sensor 3 Circuit Erratic
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0ACE Buick indicates Hybrid/EV Battery Temperature Sensor 3 Circuit Erratic.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0ACE Buick Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or greater for 4 out of 5 seconds.
What are the Possible Causes of the DTC P0ACE Buick?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0ACE Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0ACE Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0ACE Buick code?
Need more information on how to fix the P0ACE Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0ACE Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0ACE Buick Code
What does the OBDII code P0ACE mean on a Buick?
P0ACE indicates an issue with the Hybrid/EV Battery Temperature Sensor 3 Circuit, specifically erratic readings from the sensor monitoring the hybrid or EV battery's temperature.
What are the common symptoms of the P0ACE code?
Symptoms may include an illuminated check engine light, reduced hybrid/EV performance, overheating battery warnings, or the vehicle entering limp mode.
What causes the P0ACE code to appear?
Common causes include a faulty battery temperature sensor, damaged or corroded wiring, poor electrical connections, or a malfunction in the hybrid/EV battery control module.
Can I drive my Buick with the P0ACE code?
Driving with the P0ACE code is not recommended, as it may lead to battery overheating or reduced performance, potentially causing further damage.
How can I diagnose the P0ACE code?
Diagnosis involves checking the battery temperature sensor, inspecting wiring and connectors for damage or corrosion, and using a scan tool to monitor temperature sensor data.
What repairs can fix the P0ACE code?
Repairs may include replacing the faulty temperature sensor, repairing damaged wiring, cleaning or reconnecting corroded connectors, or reprogramming/updating the control module.
How much does it cost to fix the P0ACE code?
Repair costs can vary, but replacing a battery temperature sensor typically costs $100–$300, while wiring repairs or control module replacement may be more expensive.
Can a software update resolve the P0ACE code?
In some cases, a software update or reprogramming the hybrid control module may resolve the issue if it's related to system calibration.
What tools are needed to diagnose the P0ACE code?
A professional OBDII scan tool, multimeter, and repair manual specific to your Buick model are essential for diagnosing and repairing this code.
Could the P0ACE code damage the hybrid/EV battery?
Yes, ignoring this code could lead to improper temperature regulation, potentially damaging the hybrid/EV battery over time.
Discuss the causes and fixes for P0ACE Buick OBDII Code
Code P0ACE Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
