P0ACE 2016 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 3 Circuit Erratic
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0ACE 2016 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 3 Circuit Erratic.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0ACE 2016 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or greater for 4 out of 5 seconds.
What are the Possible Causes of the DTC P0ACE 2016 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0ACE 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0ACE 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0ACE 2016 Chevrolet Silverado code?
Need more information on how to fix the P0ACE 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0ACE 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0ACE 2016 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P0ACE in a 2016 Chevrolet Silverado Hybrid/EV?
- Common symptoms include poor fuel economy, reduced power, and potential illumination of the check engine light.
2. What does the OBDII code P0ACE indicate in a 2016 Chevrolet Silverado Hybrid/EV?
- The code signifies an erratic behavior in the Hybrid/EV Battery Temperature Sensor 3 circuit.
3. What are the possible causes of the Hybrid/EV Battery Temperature Sensor 3 Circuit Erratic code in a 2016 Chevrolet Silverado?
- Potential causes include a faulty temperature sensor, damaged wiring, connection issues, or problems with the sensor circuit.
4. How can I diagnose the Hybrid/EV Battery Temperature Sensor 3 Circuit issue in my 2016 Chevrolet Silverado?
- Diagnosis involves checking the sensor's wiring for damage, ensuring proper sensor connections, and using a multimeter to test the sensor's resistance.
5. Can I continue driving my 2016 Chevrolet Silverado with the P0ACE code illuminated?
- It is not recommended to drive the vehicle with the code active, as it can lead to further issues and potentially affect the vehicle's performance.
6. Is it possible to repair the Hybrid/EV Battery Temperature Sensor 3 Circuit issue in a 2016 Chevrolet Silverado yourself?
- While basic checks like inspecting connections can be done DIY, for accurate diagnosis and repair, it's best to consult a qualified mechanic or dealership.
7. How much does it typically cost to fix the Hybrid/EV Battery Temperature Sensor 3 Circuit Erratic code in a 2016 Chevrolet Silverado?
- Repair costs can vary based on the exact cause of the issue, but expect to pay for sensor replacement, wiring repairs, or labor charges, which may range from $100 to $500 or more.
8. Can a faulty Hybrid/EV Battery Temperature Sensor 3 Circuit impact the overall performance of my 2016 Chevrolet Silverado?
- Yes, a malfunctioning sensor can affect the vehicle's fuel efficiency, power delivery, and overall drivability, so prompt attention is recommended.
9. How long does it take to fix the Hybrid/EV Battery Temperature Sensor 3 Circuit issue in a 2016 Chevrolet Silverado?
- The repair time can vary based on the exact cause and complexity of the problem, but it may take a few hours to a full day for diagnosis and repair.
10. Are there any preventive maintenance tips to avoid encountering the P0ACE code in a 2016 Chevrolet Silverado Hybrid/EV in the future?
- Regularly checking the condition of sensors, ensuring proper wiring connections, and following the manufacturer's recommended service schedules can help prevent such issues.
Discuss the causes and fixes for P0ACE 2016 Chevrolet Silverado OBDII Code
Code P0ACE 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
