P0ACD GMC Code - Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0ACD GMC indicates Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0ACD GMC Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is less than -69°C (-92°F).
What are the Possible Causes of the DTC P0ACD GMC?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0ACD GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0ACD GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0ACD GMC code?
Need more information on how to fix the P0ACD GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0ACD GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0ACD 2014 GMC Sierra — Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage
- P0ACD 2015 GMC Sierra — Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage
- P0ACD 2016 GMC Sierra — Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage
- P0ACD 2017 GMC Sierra — Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage
- P0ACD 2018 GMC Sierra — Hybrid/EV Battery Temperature Sensor 3 Circuit High Voltage
Frequently Asked Questions about P0ACD GMC Code
1. What are the common symptoms of OBDII code P0ACD in a GMC vehicle?
- Common symptoms include the check engine light being illuminated, decreased fuel efficiency, and potential issues with the hybrid or electric vehicle battery system.
2. What does the OBDII code P0ACD GMC indicate?
- This code indicates a high voltage condition in the Hybrid/EV Battery Temperature Sensor 3 Circuit, which monitors the temperature of the battery in hybrid or electric vehicles.
3. What are the possible causes of OBDII code P0ACD in a GMC vehicle?
- Possible causes include a faulty Hybrid/EV Battery Temperature Sensor 3, damaged wiring or connectors in the sensor circuit, or issues with the hybrid or electric vehicle battery system.
4. How can I diagnose the cause of OBDII code P0ACD in my GMC vehicle?
- Diagnosing this code typically involves using a scan tool to retrieve the specific fault codes, checking the sensor and its circuit for proper operation, and inspecting the hybrid or electric vehicle battery system for any issues.
5. Can I continue driving my GMC vehicle with OBDII code P0ACD present?
- It is not recommended to continue driving the vehicle with this code present, as it can lead to further damage to the hybrid or electric vehicle battery system and potentially cause safety hazards.
6. How can I repair OBDII code P0ACD in a GMC vehicle?
- Repairing this code may involve replacing the Hybrid/EV Battery Temperature Sensor 3, repairing any damaged wiring or connectors in the sensor circuit, or addressing any issues with the hybrid or electric vehicle battery system.
7. Are there any DIY tips for addressing OBDII code P0ACD in a GMC vehicle?
- DIY tips may include checking for loose or damaged connections in the sensor circuit, ensuring the sensor is securely mounted and functioning properly, and consulting the vehicle's service manual for specific repair procedures.
8. How important is it to address OBDII code P0ACD promptly?
- It is important to address this code promptly to prevent further damage to the hybrid or electric vehicle battery system and ensure the vehicle's overall performance and safety are not compromised.
9. Can a mechanic easily reset the OBDII code P0ACD after repairs are made?
- Yes, a mechanic can reset the code using a scan tool after the necessary repairs have been made to clear the check engine light and ensure the issue has been resolved.
10. Is it recommended to seek professional help for diagnosing and repairing OBDII code P0ACD in a GMC vehicle?
- Yes, due to the complexity of hybrid and electric vehicle systems, it is recommended to seek professional help from a certified mechanic or dealership with experience in diagnosing and repairing issues related to this code.
Discuss the causes and fixes for P0ACD GMC OBDII Code
Code P0ACD GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
