P0ACC 2016 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 3 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0ACC 2016 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 3 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0ACC 2016 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0ACC 2016 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0ACC 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0ACC 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0ACC 2016 GMC Sierra code?
Need more information on how to fix the P0ACC 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0ACC 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0ACC 2016 GMC Sierra Code
What does the OBDII code P0ACC mean on a 2016 GMC Sierra?
The P0ACC code indicates that the Hybrid/EV Battery Temperature Sensor 3 Circuit is reporting a low voltage condition, suggesting an issue with the sensor, wiring, or related components.
What are the symptoms of the P0ACC code in a 2016 GMC Sierra?
Common symptoms include an illuminated check engine light, potential hybrid system warnings, reduced fuel efficiency, or limited hybrid system performance.
What causes the P0ACC code to appear?
The code can be caused by a faulty battery temperature sensor, damaged or corroded wiring, loose connections, or an issue with the hybrid battery control module.
Is it safe to drive a 2016 GMC Sierra with the P0ACC code?
While the vehicle may still be drivable, it’s not recommended to ignore the issue as it could lead to further damage to the hybrid system or reduced performance.
How is the P0ACC code diagnosed?
A mechanic will use an OBDII scanner to confirm the code, inspect the battery temperature sensor, check wiring and connections, and test the hybrid battery control module.
Can I fix the P0ACC code on my own?
If you're comfortable with basic repairs, you can inspect the wiring and connectors for damage or corrosion. However, sensor or module replacement may require professional expertise.
How much does it cost to repair the P0ACC code?
The repair cost can vary depending on the issue, ranging from $100 for minor wiring repairs to $500 or more for sensor or module replacement.
Do I need to replace the hybrid battery if I get the P0ACC code?
Not necessarily. The issue is often related to the temperature sensor or its circuit rather than the battery itself, but a professional diagnosis is recommended.
How can I prevent the P0ACC code from reoccurring?
Regular maintenance, including checking for damaged wiring and ensuring proper connections, can help prevent the code from reappearing.
What happens if I ignore the P0ACC code?
Ignoring the code may lead to reduced hybrid system efficiency, potential overheating of the battery, or further damage to related components over time.
Discuss the causes and fixes for P0ACC 2016 GMC Sierra OBDII Code
Code P0ACC 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
