P0ACB 2014 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 3 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0ACB 2014 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 3 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0ACB 2014 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0ACB 2014 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0ACB 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0ACB 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0ACB 2014 Chevrolet Silverado code?
Need more information on how to fix the P0ACB 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0ACB 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0ACB 2014 Chevrolet Silverado Code
1. What does the OBDII code P0ACB mean on a 2014 Chevrolet Silverado?
P0ACB indicates an issue with the Hybrid/EV Battery Temperature Sensor 3, specifically a performance or range fault detected by the powertrain control module (PCM).
2. What are the symptoms of code P0ACB in a 2014 Chevrolet Silverado?
Common symptoms include an illuminated check engine light, reduced fuel efficiency, limited hybrid or EV functionality, and potential overheating of the battery pack.
3. What causes the P0ACB code to appear?
The most common causes are a faulty battery temperature sensor, damaged wiring or connectors, or a glitch in the battery control module.
4. Can I drive my 2014 Chevrolet Silverado with the P0ACB code?
It’s not recommended, as this code can indicate issues with battery temperature monitoring, which could lead to battery overheating or reduced performance.
5. How do you diagnose the P0ACB code on a 2014 Chevrolet Silverado?
Diagnosis typically involves using a scan tool to read the code, inspecting the battery temperature sensor and its wiring, and verifying sensor readings with a multimeter.
6. How do you fix the P0ACB code on a 2014 Chevrolet Silverado?
Repairs may involve replacing the faulty battery temperature sensor, repairing damaged wiring, or reprogramming the battery control module if necessary.
7. How much does it cost to fix the P0ACB code?
The repair cost varies depending on the issue, but replacing a temperature sensor may cost between $100 and $300, including parts and labor.
8. Can a weak hybrid battery cause the P0ACB code?
While the code is specifically related to the temperature sensor, a failing hybrid battery could contribute to abnormal temperature readings.
9. Is the P0ACB code covered under warranty for a 2014 Chevrolet Silverado?
It depends on your vehicle's warranty coverage. Some hybrid-related components may still be covered under extended warranties for hybrid systems.
10. How can I prevent the P0ACB code from reoccurring?
Regular maintenance of the hybrid battery system, inspecting wiring for damage, and promptly addressing any related warning lights can help prevent this code from reappearing.
Discuss the causes and fixes for P0ACB 2014 Chevrolet Silverado OBDII Code
Code P0ACB 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
