AutoCodesChevrolet – P0AC9 2017 Chevrolet Silverado

P0AC9 2017 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 2 Circuit Erratic

Quick Answer

Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0AC9 2017 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 2 Circuit Erratic.
Common causes
Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 294
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 22, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0AC9 2017 Chevrolet Silverado Description

Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. The non-serviceable battery temperature sensors are located within the battery sections. Two temperature sensors are located in each battery section. The temperature sensor is a variable resistor that measures the temperature of the battery cell group. The hybrid/EV interface control module supplies 5 V to the signal circuit and is a ground for the low reference circuit. The battery temperature sensor resistance changes with battery temperature. As the temperature decreases, the sensor resistance increases. As the temperature increases, the sensor resistance decreases.
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or greater for 4 out of 5 seconds.
OBDII Code P0AC9 2017 Chevrolet Silverado - Hybrid/EV Battery Temperature Sensor 2 Circuit Erratic - AutoCodes.com
P0AC9 2017 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 2 Circuit Erratic

What are the Possible Causes of the DTC P0AC9 2017 Chevrolet Silverado?

  • Faulty Hybrid/EV Battery Assembly
  • Hybrid/EV Battery Assembly harness is open or shorted
  • Hybrid/EV Battery Assembly circuit poor electrical connection
  • Faulty Hybrid/EV Battery Interface Control Module

How to Fix the DTC P0AC9 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0AC9 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0AC9 2017 Chevrolet Silverado code?

Need more information on how to fix the P0AC9 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0AC9 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0AC9 2017 Chevrolet Silverado Code

What does the OBDII code P0AC9 mean for a 2017 Chevrolet Silverado?

The code P0AC9 indicates an issue with the Hybrid/EV Battery Temperature Sensor 2 Circuit, which is functioning erratically.

What are common symptoms of the P0AC9 code on a 2017 Chevrolet Silverado?

Symptoms may include a check engine light, reduced hybrid system performance, lower fuel efficiency, and possible overheating of the hybrid battery.

What causes the P0AC9 code to appear in a 2017 Chevrolet Silverado?

Common causes include a faulty temperature sensor, wiring issues such as damage or corrosion, poor electrical connections, or a malfunctioning hybrid battery control module.

How can I diagnose the P0AC9 code on a 2017 Chevrolet Silverado?

Diagnosis typically involves checking for loose or damaged wiring, inspecting the temperature sensor, and using a scan tool to monitor sensor data for erratic readings.

Can I still drive my 2017 Chevrolet Silverado with the P0AC9 code?

Driving with this code is not recommended, as it may lead to reduced hybrid system performance or potential damage to the battery due to overheating.

How do I fix the P0AC9 code on my 2017 Chevrolet Silverado?

Repairs may include replacing the faulty temperature sensor, repairing damaged wiring, or replacing the hybrid battery control module if necessary.

Does the P0AC9 code indicate a serious problem?

While it may not immediately affect drivability, it signals a critical issue with the hybrid battery temperature monitoring system and should be addressed promptly.

How much does it cost to repair the P0AC9 code on a 2017 Chevrolet Silverado?

Repair costs can vary but typically range from $100 to $500, depending on whether the temperature sensor, wiring, or control module needs replacement.

Can a software update fix the P0AC9 code on a 2017 Chevrolet Silverado?

In rare cases, a software update for the hybrid battery control module may resolve the issue, but physical repairs are more common.

What tools are needed to troubleshoot the P0AC9 code?

A diagnostic scan tool, multimeter for testing wiring, and repair manual specific to the 2017 Chevrolet Silverado are essential for accurate troubleshooting.

Discuss the causes and fixes for P0AC9 2017 Chevrolet Silverado OBDII Code

Code P0AC9 2017 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play