P0AC7 2015 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 2 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AC7 2015 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AC7 2015 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0AC7 2015 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AC7 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AC7 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AC7 2015 Chevrolet Silverado code?
Need more information on how to fix the P0AC7 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AC7 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AC7 2015 Chevrolet Silverado Code
1. What does the OBDII code P0AC7 mean on a 2015 Chevrolet Silverado?
P0AC7 indicates a low voltage issue in the Hybrid/EV Battery Temperature Sensor 2 Circuit, which monitors the temperature of the hybrid battery pack to ensure safe operation.
2. What are the common symptoms of code P0AC7 in a 2015 Chevrolet Silverado?
Symptoms may include the hybrid system warning light, reduced fuel efficiency, limited hybrid functionality, or restricted vehicle performance.
3. What causes the P0AC7 code to trigger?
Causes can include a faulty temperature sensor, damaged wiring or connectors in the circuit, a malfunctioning hybrid battery control module, or corrosion in the electrical connections.
4. Can I drive my 2015 Chevrolet Silverado with the P0AC7 code?
Driving with this code is not recommended, as it can lead to further damage to the hybrid battery system or cause the vehicle to enter a limp mode.
5. How do I diagnose the P0AC7 code on my Silverado?
Start by inspecting the temperature sensor and its circuit for signs of damage, corrosion, or loose connections. Use a multimeter to check for proper voltage and continuity in the circuit.
6. How is the P0AC7 code fixed?
Repairs may involve replacing the battery temperature sensor, repairing or replacing damaged wiring or connectors, or reprogramming/updating the hybrid battery control module.
7. How much does it cost to fix the P0AC7 code on a 2015 Silverado?
Repair costs vary but typically range from $100 to $400, depending on whether the issue is with the sensor, wiring, or control module.
8. Can a bad hybrid battery cause the P0AC7 code?
While uncommon, a failing hybrid battery could potentially cause this code if it leads to abnormal temperature readings or sensor circuit issues.
9. What tools are needed to diagnose and repair the P0AC7 code?
You’ll need an OBDII scanner with hybrid system capabilities, a multimeter for electrical testing, and possibly repair manuals or wiring diagrams specific to the 2015 Silverado.
10. Will clearing the P0AC7 code fix the problem?
Clearing the code may temporarily reset the warning, but it won’t fix the underlying issue. Proper diagnosis and repair are necessary to prevent the code from reappearing.
Discuss the causes and fixes for P0AC7 2015 Chevrolet Silverado OBDII Code
Code P0AC7 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
