P0AC6 2016 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 2 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AC6 2016 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 2 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AC6 2016 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0AC6 2016 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AC6 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AC6 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AC6 2016 GMC Sierra code?
Need more information on how to fix the P0AC6 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AC6 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AC6 2016 GMC Sierra Code
1. What does the OBDII code P0AC6 mean on a 2016 GMC Sierra?
The code P0AC6 indicates a performance issue with Hybrid/EV Battery Temperature Sensor 2, which monitors the temperature of the vehicle's hybrid battery system.
2. What are the symptoms of code P0AC6 in a 2016 GMC Sierra?
Symptoms may include an illuminated check engine light, reduced fuel efficiency, limited hybrid system performance, or the vehicle entering a fail-safe mode.
3. What causes the P0AC6 code to appear on a 2016 GMC Sierra?
Common causes include a faulty battery temperature sensor, damaged wiring or connectors, or issues with the hybrid battery control module.
4. How do I diagnose the P0AC6 code on my GMC Sierra?
Diagnosis involves scanning for additional codes, inspecting the wiring and connectors around Battery Temperature Sensor 2, and testing the sensor's resistance and output.
5. Can I drive my 2016 GMC Sierra with the P0AC6 code?
It’s not recommended, as the hybrid system may not function properly, potentially causing reduced performance or damage to the battery system.
6. How do I fix the P0AC6 code on a 2016 GMC Sierra?
Repairs may involve replacing the faulty temperature sensor, repairing damaged wiring, or reprogramming or replacing the hybrid battery control module.
7. How much does it cost to fix the P0AC6 code on a 2016 GMC Sierra?
Costs vary depending on the issue, with sensor replacement typically ranging from $100 to $300, while control module repairs or replacements can be significantly more expensive.
8. Is the P0AC6 code specific to GMC Sierra hybrid models?
Yes, this code is specific to hybrid or electric vehicle systems and will only appear on models equipped with hybrid drivetrains.
9. Can a dead or weak 12V battery cause the P0AC6 code?
A weak 12V battery is unlikely to directly cause the P0AC6 code but could lead to other hybrid system issues that might indirectly contribute to the problem.
10. Does the P0AC6 code require reprogramming the hybrid control module?
Reprogramming is only necessary if the control module itself is faulty or if a software update is required to resolve the issue.
Discuss the causes and fixes for P0AC6 2016 GMC Sierra OBDII Code
Code P0AC6 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
