P0AC6 2015 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 2 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AC6 2015 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 2 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AC6 2015 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0AC6 2015 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AC6 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AC6 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AC6 2015 GMC Sierra code?
Need more information on how to fix the P0AC6 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AC6 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AC6 2015 GMC Sierra Code
1. What does the OBDII code P0AC6 mean on a 2015 GMC Sierra?
The P0AC6 code indicates an issue with the performance of Hybrid/EV Battery Temperature Sensor 2, which monitors the temperature of the vehicle's hybrid battery.
2. What are the symptoms of the P0AC6 code in a 2015 GMC Sierra?
Common symptoms include warning lights on the dashboard (e.g., hybrid system warning), reduced fuel efficiency, and possible limitations in EV mode operation.
3. What causes the P0AC6 code to appear on a GMC Sierra?
Possible causes include a faulty battery temperature sensor, wiring issues such as corrosion or damage, or a malfunction in the hybrid battery control module.
4. Can I continue driving with the P0AC6 code in my GMC Sierra?
While the truck may still be drivable, ignoring the code can lead to further damage to the hybrid battery system or reduced performance. Prompt diagnosis and repair are recommended.
5. How is the P0AC6 code diagnosed?
A technician will use a scan tool to confirm the code, inspect wiring and connectors for damage, and test the battery temperature sensor for proper functionality.
6. How do you fix the P0AC6 code on a 2015 GMC Sierra?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring, or reprogramming/updating the hybrid battery control module.
7. How much does it cost to fix the P0AC6 code on a GMC Sierra?
Repair costs vary depending on the issue but typically range from $150 to $500, depending on whether the sensor or related components need replacement.
8. Can a weak hybrid battery cause the P0AC6 code to trigger?
Yes, a degraded or overheating hybrid battery may cause abnormal temperature readings, triggering the code.
9. Is the P0AC6 code specific to the GMC Sierra?
No, the P0AC6 code can appear in other hybrid or EV vehicles with similar battery temperature monitoring systems, but the specifics of the repair may vary.
10. Is it possible for a software issue to cause the P0AC6 code?
Yes, outdated or malfunctioning hybrid battery control module software can sometimes cause false readings and trigger this code.
Discuss the causes and fixes for P0AC6 2015 GMC Sierra OBDII Code
Code P0AC6 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
