P0AC1 Buick Code - Hybrid/EV Battery Low Resolution Current Sensor Circuit Low Voltage
Quick Answer
The hybrid/EV battery current sensor is mounted inside the hybrid/EV battery pack. Common causes include Faulty Battery Energy Control Module, Battery Energy Control Module harness is open or shorted, Battery Energy Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AC1 Buick indicates Hybrid/EV Battery Low Resolution Current Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Battery Energy Control Module, Battery Energy Control Module harness is open or shorted, Battery Energy Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AC1 Buick Description
What are the Possible Causes of the DTC P0AC1 Buick?
- Faulty Battery Energy Control Module
- Battery Energy Control Module harness is open or shorted
- Battery Energy Control Module circuit poor electrical connection
How to Fix the DTC P0AC1 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AC1 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AC1 Buick code?
Need more information on how to fix the P0AC1 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AC1 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AC1 Buick Code
What does the OBDII code P0AC1 mean for a Buick?
1. The P0AC1 code indicates an issue with the Hybrid/EV battery's low-resolution current sensor circuit, specifically detecting low voltage. 2.
What are the symptoms of code P0AC1 in a Buick?
Common symptoms include reduced fuel efficiency, decreased hybrid system performance, the vehicle operating in limited power mode, and the illumination of the check engine light. 3.
What causes the P0AC1 code to appear on a Buick?
The code can be triggered by a faulty current sensor, damaged wiring, loose or corroded electrical connections, or a malfunction in the hybrid battery control module. 4.
Can I drive my Buick with the P0AC1 code active?
While the vehicle may still be drivable, doing so can cause further damage to the hybrid system. It’s best to address the issue promptly to avoid costly repairs. 5.
How is the P0AC1 code diagnosed in a Buick?
A technician will use a scan tool to confirm the code, inspect wiring and connectors, test the current sensor, and check the hybrid battery control module for proper operation. 6.
How do I fix the P0AC1 code on a Buick?
Repairs may include replacing the faulty current sensor, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming or replacing the hybrid battery control module. 7.
How much does it cost to repair a P0AC1 code on a Buick?
The repair cost varies depending on the issue but typically ranges from $150 to $500, with higher costs if the hybrid battery control module needs replacement. 8.
Can a weak hybrid battery cause the P0AC1 code in a Buick?
Yes, a weak or failing hybrid battery can sometimes contribute to sensor circuit issues, although it’s not the most common cause. 9.
Will clearing the P0AC1 code fix the issue?
Clearing the code without addressing the underlying issue will only temporarily turn off the check engine light, and the code will likely return. 10.
What tools are needed to troubleshoot the P0AC1 code on a Buick?
A diagnostic scan tool, a multimeter for checking voltage and continuity, and wiring diagrams for the hybrid system are essential for proper troubleshooting.
Discuss the causes and fixes for P0AC1 Buick OBDII Code
Code P0AC1 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
