P0AB9 Code - Hybrid System Performance
Quick Answer
The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AB9 indicates Hybrid System Performance.
- Common causes
- Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AB9 Description
The eAssist hybrid system has the ability to crank and start the engine using two different methods. The first method is a conventional 12 volt system. On every initial start up the conventional 12 volt starter and 12 volt battery are used to crank and start the engine.
The second starting method uses both the 115 Volt generator control and battery assembly, also called the hybrid EV battery pack, and the starter generator, also called the drive motor. The drive motor is a 3 phase AC induction machine. This device not only serves as a 115-volt AC generator, it is also used to provide engine power assist and to start the engine when in auto-stop mode. If the system is in the auto-stop mode and fails to restart with the drive motor, the 12 volt conventional starter will automatically be engaged to start the engine.
The drive motor can quickly rotate the engine to operating speed (800 RPM). The hybrid powertrain control module can detect a condition where the engine is stalling and command the drive motor to rotate the engine to prevent a stall.
What are the Possible Causes of the DTC P0AB9?
- Faulty Starter Generator Control Module
- Starter Generator Control Module harness is open or shorted
- Starter Generator Control Module circuit poor electrical connection
How to Fix the DTC P0AB9?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AB9 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AB9 code?
Need more information on how to fix the P0AB9 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AB9 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0AB9 Buick — Hybrid System Performance
- P0AB9 Cadillac — Hybrid System Performance
- P0AB9 Chevrolet — Hybrid System Performance
- P0AB9 GMC — Hybrid System Performance
Frequently Asked Questions about P0AB9 Code
No Frequently Asked Questions about P0AB9 Code found.
Discuss the causes and fixes for P0AB9 OBDII Code
Code P0AB9 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
