P0AAE Code - Hybrid Battery Pack Air Temperature Sensor 'A' Circuit Low
Quick Answer
The intake air temperature sensor is provided on the HV battery assembly. Common causes include Faulty HV Battery Assembly (Intake Air Temperature Sensor), HV Battery Assembly harness is open or shorted, HV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AAE indicates Hybrid Battery Pack Air Temperature Sensor 'A' Circuit Low.
- Common causes
- Common causes include Faulty HV Battery Assembly (Intake Air Temperature Sensor), HV Battery Assembly harness is open or shorted, HV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AAE Description
The battery ECU uses the signals from the intake air temperature sensor for adjusting the air flow speed of the battery blower assembly
What are the Possible Causes of the DTC P0AAE?
- Faulty HV Battery Assembly (Intake Air Temperature Sensor)
- HV Battery Assembly harness is open or shorted
- HV Battery Assembly circuit poor electrical connection
- Faulty Battery ECU
How to Fix the DTC P0AAE?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AAE code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AAE code?
Need more information on how to fix the P0AAE code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AAE code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0AAE Buick — Hybrid/EV Battery Pack Air Temperature Sensor 1 Circuit Low Voltage
- P0AAE Cadillac — Hybrid/EV Battery Pack Air Temperature Sensor 1 Circuit Low Voltage
- P0AAE Chevrolet — Hybrid/EV Battery Pack Air Temperature Sensor 1 Circuit Low Voltage
- P0AAE GMC — Hybrid/EV Battery Pack Air Temperature Sensor 1 Circuit Low Voltage
- P0AAE Lexus — Hybrid Battery Pack Air Temperature Sensor 'A' Circuit Low
- P0AAE Toyota — Hybrid Battery Pack Air Temperature Sensor 'A' Circuit Low
Frequently Asked Questions about P0AAE Code
1. What does the OBDII code P0AAE indicate?
The code P0AAE means that there is a low voltage issue in the circuit of the 'A' air temperature sensor within the hybrid battery pack, indicating a potential problem with the sensor or its circuit.
2. What symptoms might I notice if my vehicle has the P0AAE code?
Symptoms can include reduced fuel efficiency, possible changes in the hybrid system’s performance, and in some cases, the hybrid system might enter a fail-safe mode to prevent damage to the battery.
3. What are common causes of the P0AAE code?
Common causes include a faulty hybrid battery pack air temperature sensor, damaged wiring or connectors related to the sensor, or a problem with the hybrid control module.
4. How can I diagnose the problem causing the P0AAE code?
Diagnosis involves checking the sensor and its connections for any signs of damage or corrosion, measuring the voltage in the sensor circuit, and possibly replacing the sensor to see if the issue resolves.
5. What are the repair steps for fixing code P0AAE?
Repair steps typically include inspecting and cleaning all related connectors, replacing damaged wires, replacing the faulty temperature sensor, and clearing the code to see if it reappears.
6. Is it safe to drive my vehicle with the P0AAE code active?
While you might be able to drive, it’s not recommended as it could lead to further damage of the hybrid battery system. It’s best to address the issue as soon as possible.
7. What tools are needed to diagnose and repair the P0AAE code?
You will need a digital multimeter, a scan tool with hybrid diagnostic capabilities, and basic hand tools for accessing the sensor.
8. Could ignoring the P0AAE code lead to other vehicle problems?
Yes, ignoring this code can lead to decreased performance of the hybrid system, potentially causing the battery to overheat or fail prematurely.
9. Are there any preventative measures to avoid triggering the P0AAE code?
Regular maintenance of the hybrid battery system, including checking its cooling system and ensuring connections are clean and secure, can help prevent this and similar codes.
10. How much does it typically cost to fix the P0AAE code?
The cost can vary widely depending on the cause. Sensor replacement might cost anywhere from $150 to $300, but if there are deeper issues within the hybrid system, costs can be significantly higher.
Discuss the causes and fixes for P0AAE OBDII Code
Code P0AAE comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
