P0AA6 RAM Code - Hybrid/EV Battery Voltage System Isolation Lost
Quick Answer
The Battery Pack Control Module (BPCM) is contained within the High Voltage Battery Pack. Common causes include Service disconnect, Air Electric Heater (AEH), Air Electric Geater (AEH) high voltage harness. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AA6 RAM indicates Hybrid/EV Battery Voltage System Isolation Lost.
- Common causes
- Common causes include Service disconnect, Air Electric Heater (AEH), Air Electric Geater (AEH) high voltage harness.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AA6 RAM Description
What are the Possible Causes of the DTC P0AA6 RAM?
- Service disconnect
- Air Electric Heater (AEH)
- Air Electric Geater (AEH) high voltage harness
- Electric Air Compressor (EAC)
- E-motor
- E-motor high voltage harness
- Power Inverter Module (PIM)
- Power Inverter Module (PIM) high voltage harness
- High Voltage Power Distribution Center (HVPDC)
- High Voltage Battery Pack (HVBP)
- On Board Charging Module (OBCM)
- On Board Charging Module (OBCM) high voltage harness
- Battery Coolant Heater (BCH)
- Battery charger
How to Fix the DTC P0AA6 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AA6 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AA6 RAM code?
Need more information on how to fix the P0AA6 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AA6 RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AA6 RAM Code
1. What does the OBDII code P0AA6 mean for a RAM vehicle?
The P0AA6 code indicates that the hybrid or EV battery voltage system has lost proper isolation, meaning there is an electrical leakage or short to ground within the high-voltage system.
2. What are the common symptoms of code P0AA6 in a RAM vehicle?
Symptoms may include a "Check Engine" light, reduced hybrid or EV performance, failure to start, or warning messages related to the high-voltage system.
3. What causes the P0AA6 code to trigger in a RAM hybrid or EV?
Common causes include damaged high-voltage wiring, water intrusion into the battery pack, degraded insulation, or a faulty hybrid battery pack.
4. Is the P0AA6 code safe to ignore or drive with?
No, driving with this code can be dangerous as it indicates an electrical issue in the high-voltage system, which could lead to further damage or pose a safety hazard.
5. How can I diagnose the P0AA6 code on my RAM vehicle?
Diagnosis involves using a scan tool to identify subcodes (INF codes) for more details, inspecting high-voltage components, and checking for water intrusion or insulation damage.
6. Can water damage cause the P0AA6 code in RAM hybrid or EV systems?
Yes, water intrusion into the high-voltage battery or wiring can degrade insulation and lead to voltage isolation loss, triggering this code.
7. What repairs might fix the P0AA6 code on a RAM vehicle?
Repairs could include replacing damaged high-voltage cables, repairing or replacing the hybrid battery, sealing leaks, or addressing faulty components like the inverter.
8. How much does it typically cost to fix the P0AA6 code?
Repair costs can vary widely, ranging from a few hundred dollars for wiring repairs to several thousand dollars if the hybrid battery needs replacement.
9. Can I clear the P0AA6 code without fixing the problem?
Clearing the code without addressing the underlying issue is not recommended, as the problem will likely return and may cause further damage or safety concerns.
10. Should I take my RAM hybrid or EV to a specialist for the P0AA6 code?
Yes, it is best to consult a qualified technician with experience in hybrid and EV systems to ensure accurate diagnosis and safe repairs.
Discuss the causes and fixes for P0AA6 RAM OBDII Code
Code P0AA6 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
