P0A80 Toyota Code - Replace Hybrid Battery Pack
Quick Answer
The HV battery uses nickel metal-hydride batteries and does not require external charging. Common causes include HV battery assembly, Battery smart unit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0A80 Toyota indicates Replace Hybrid Battery Pack.
- Common causes
- Common causes include HV battery assembly, Battery smart unit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0A80 Toyota Description
The battery smart unit, which monitors the voltage of the battery blocks, determines that malfunction has occurred if a voltage difference between the battery blocks exceeds the standard. When the malfunction detection condition is satisfied, the power management control ECU (HV CPU) will illuminates the MIL and sets the P0A80 code.
What are the Possible Causes of the DTC P0A80 Toyota?
- HV battery assembly
- Battery smart unit
How to Fix the DTC P0A80 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2007-2011 Toyota Camry HV Factory Service Bulletin OBDII Code P0A80
The service bulletin recommends cleaning the cooling fan to repair the problem.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0A80 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0A80 Toyota code?
Need more information on how to fix the P0A80 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0A80 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- P0A80 2010 Toyota Prius — Replace Hybrid Battery Pack
- P0A80 2011 Toyota Prius — Replace Hybrid Battery Pack
- P0A80 2012 Toyota Prius — Replace Hybrid Battery Pack
- P0A80 2013 Toyota Prius — Replace Hybrid Battery Pack
- P0A80 2014 Toyota Prius — Replace Hybrid Battery Pack
- P0A80 2015 Toyota Prius — Replace Hybrid Battery Pack
Frequently Asked Questions about P0A80 Toyota Code
No Frequently Asked Questions about P0A80 Toyota Code found.
Discuss the causes and fixes for P0A80 Toyota OBDII Code
-
On dash board, "check VSC system", " check hybrid system ", maintainance required", appears. Engine starts only after disconnecting & replacing battery heads, but stops shortly before bigger engine starts, so motor cannot move. What do I do?
-
If you get the P0A80, besides all the symptoms you described, then the problem is the hybrid battery assembly. What model and year is your Toyota?
-
2007 Toyota Camry Hybrid with 124K miles.
I have the same problem.
I add brake fluid because it was on minimum, that seems to fix the VSC part.
I still getting the Battery Hybrid light and P0A80 code. -
Have you look at the Factory Service bulletin listed above? the bulletin recommend Clean HV Battery Cooling Fan, Replace HV Battery Assembly, and Install HV Battery Cooling Fan Intake Filter
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
