P0A09 DODGE - DC/DC Converter Status Circuit Low
P0A09 DODGE Possible Causes
- Faulty DC/DC Converter
- DC/DC Converter harness is open or shorted
- DC/DC Converter circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
First diagnose P0A09 DODGE code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0A09 DODGE code
Labor: 1.0The cost of diagnosing the P0A09 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P0A09 DODGE Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0a09 Dodge DescriptionThe Powertrain Control Module (PCM) controls the DC/DC enable hardwired signal to switch the DC/DC converter on and off. The DC/DC converter provides feedback to the PCM using the hardwired DC/DC fault signal. The DC/DC fault signal indicates to the PCM when the converter is non-operational or when a fault has occurred.
P0A09 DODGE More InformationNeed more information on how to fix the P0A09 DODGE code?
Get Access to Factory Service Manuals
Need more help?Get the P0a09 Dodge code diagnosed by a professional: Find a repair shop in your area
P0A09 DODGE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0a09 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks