AutoCodes – GMC – P0990 2016 GMC Sierra

P0990 2016 GMC Sierra Code - Transmission Fluid Pressure Switch 5 Circuit High Voltage

Quick Answer

The Transmission Fluid Pressure (TFP) switch 5 is part of the Transmission Control Solenoid Valve Assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0990 2016 GMC Sierra indicates Transmission Fluid Pressure Switch 5 Circuit High Voltage.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 189

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0990 2016 GMC Sierra Description

The Transmission Fluid Pressure (TFP) switch 5 is part of the Transmission Control Solenoid Valve Assembly, which has no serviceable parts. The Transmission Control Module (TCM) supplies a signal circuit to the TFP switch 5. The TFP switch 5 has an internal case ground. TFP switch 5 is normally closed or LOW. When oil pressure is present at the TFP switch 5, the switch is open or HIGH. The normally high-pressure control (PC) solenoid 3 controls pressure to the R1/4-5-6 clutch regular valve. The TCM monitors the TFP switch 5 signal circuit to determine the position of the R1/4-5-6 clutch regulator valve. When the low and reverse clutch and 4-5-6 clutch are commanded OFF, pressure is present on the TFP switch 5. When the low and reverse clutch or the 4-5-6 clutch is commanded ON, the R1/4-5-6 clutch regulator valve moves, and pressure to the TFP switch 5 is exhausted through the R1/4-5-6 clutch regulator valve. The Diagnostic Trouble Code (DTC) will be set when the TCM detects that the TFP switch 5 signal voltage remains HIGH after the 4-5-6 clutch transitions from a LOW pressure state to a HIGH pressure state. The TCM counts each incident. The DTC sets when 15 counts are accumulated.

OBDII Code P0990 2016 GMC Sierra - Transmission Fluid Pressure Switch 5 Circuit High Voltage - AutoCodes.com — P0990 2016 GMC Sierra Code - Transmission Fluid Pressure Switch 5 Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0990 2016 GMC Sierra?

Low transmission fluid level
Dirty transmission fluid
Faulty Transmission Control Solenoid Valve Assembly
Transmission Control Solenoid Valve Assembly harness is open or shorted
Transmission Control Solenoid Valve Assembly circuit poor electrical connection

How to Fix the DTC P0990 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0990 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0990 2016 GMC Sierra code?

Need more information on how to fix the P0990 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0990 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0990 2016 GMC Sierra Code

1. What does the OBDII code P0990 mean on a 2016 GMC Sierra?

P0990 indicates a high voltage issue in the Transmission Fluid Pressure (TFP) Switch 5 Circuit, which helps monitor hydraulic pressure in the transmission.

2. What are the common symptoms of code P0990 in a 2016 GMC Sierra?

Symptoms may include erratic shifting, the transmission stuck in a single gear, reduced power mode, delayed engagement, or the check engine light turning on.

3. What causes the P0990 code to appear on a 2016 GMC Sierra?

Common causes include a faulty pressure switch, damaged wiring or connectors in the circuit, a malfunctioning transmission control module (TCM), or low transmission fluid.

4. Can low transmission fluid cause the P0990 code?

Yes, low or contaminated transmission fluid can lead to improper hydraulic pressure, triggering the P0990 code.

5. How do you diagnose the P0990 code in a 2016 GMC Sierra?

Start by checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and testing the TFP switch and related circuits with a multimeter.

6. Is it safe to drive a 2016 GMC Sierra with the P0990 code?

Driving with this code is not recommended as it can lead to poor transmission performance or potential damage if the issue is not resolved.

7. How much does it cost to fix the P0990 code on a 2016 GMC Sierra?

Repair costs can vary, but replacing the TFP switch typically costs $150â€“$300, while wiring repairs or TCM replacement may cost more depending on labor rates.

8. Can the P0990 code be caused by a bad transmission control module (TCM)?

Yes, a malfunctioning TCM can misinterpret circuit voltage levels and trigger the P0990 code.

9. Will clearing the P0990 code fix the issue on a 2016 GMC Sierra?

Clearing the code with a scanner will temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.

10. How do you prevent the P0990 code from occurring?

Regular maintenance, such as checking and replacing transmission fluid, inspecting wiring for damage, and addressing transmission issues promptly, can help prevent this code.