P0986 - Shift Solenoid 'E' Control Circuit High
P0986 Possible Causes
- Faulty pressure control solenoid valve 'E'
- Pressure control solenoid valve 'E' harness is open or shorted
- Pressure control solenoid valve 'E' circuit poor electrical connection
- Faulty Engine Control Module (ECM)
- Low transmission fluid level
- Dirty transmission fluid
First diagnose P0986 code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0986 code
Labor: 1.0The cost of diagnosing the P0986 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0986 code detected?Engine Control Module (ECM) detectes an open or shorted condition on the solenoid circuit
P0986 Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Shift shock
P0986 DescriptionShifting from 1st to 5th is performed in combination with ”ON” and ”OFF” operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which is controlled by the Engine Control Module (ECM). If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valve to allow the vehicle to be operated smoothly (Fail safe function).
P0986 More InformationNeed more information on how to fix the P0986 code?
Get Access to Factory Service Manuals
P0986 Information for specific makes
Need more help?Get the P0986 code diagnosed by a professional: Find a repair shop in your area
P0986 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0986 code? Have you replaced any parts?
Any information is appreciated. Thanks