AutoCodes – Toyota – P0985 2008 Toyota Camry

P0985 2008 Toyota Camry Code - Shift Solenoid 'E' Control Circuit Low Valve SR

Quick Answer

Shifting from 1st to 5th is performed in combination with â€ONâ€ and â€OFFâ€ operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which is controlled by the Engine Control Module (ECM). Common causes include Dirty transmission fluid, Low transmission fluid level, Faulty pressure control solenoid valve SR. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0985 2008 Toyota Camry indicates Shift Solenoid 'E' Control Circuit Low Valve SR.
Common causes: Common causes include Dirty transmission fluid, Low transmission fluid level, Faulty pressure control solenoid valve SR.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,050

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0985 2008 Toyota Camry Description

Shifting from 1st to 5th is performed in combination with â€ONâ€ and â€OFFâ€ operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which is controlled by the Engine Control Module (ECM). If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valve to allow the vehicle to be operated smoothly (Fail safe function).

OBDII Code P0985 2008 Toyota Camry - Shift Solenoid 'E' Control Circuit Low Valve SR - AutoCodes.com — P0985 2008 Toyota Camry Code - Shift Solenoid 'E' Control Circuit Low Valve SR

What does this mean?

What are the Possible Causes of the DTC P0985 2008 Toyota Camry?

Dirty transmission fluid
Low transmission fluid level
Faulty pressure control solenoid valve SR
Pressure control solenoid valve SR harness is open or shorted
Pressure control solenoid valve SR circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0985 2008 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0985 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0985 2008 Toyota Camry code?

Need more information on how to fix the P0985 2008 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0985 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0985 2008 Toyota Camry Code

1. What does the OBDII code P0985 mean for a 2008 Toyota Camry?

P0985 indicates an issue with the Shift Solenoid 'E' Control Circuit, specifically that the circuit voltage is lower than expected.

2. What are the common symptoms of code P0985 in a 2008 Toyota Camry?

Symptoms may include harsh or delayed shifting, transmission stuck in a single gear, reduced fuel efficiency, and the Check Engine Light illuminating.

3. What causes the P0985 code to appear in a 2008 Toyota Camry?

Common causes include a faulty shift solenoid 'E,' damaged or corroded wiring, a malfunctioning transmission control module (TCM), or low transmission fluid.

4. Can driving with the P0985 code damage my 2008 Toyota Camry?

Yes, continuing to drive with this code can lead to further transmission damage or unsafe driving conditions due to erratic shifting.

5. How can I diagnose the P0985 code in my 2008 Toyota Camry?

Use an OBDII scanner to confirm the code, then inspect the shift solenoid 'E,' wiring harness, and connectors for damage or corrosion. Check the transmission fluid level and condition.

6. How do I fix the P0985 code in a 2008 Toyota Camry?

Repairs may involve replacing the shift solenoid 'E,' repairing or replacing damaged wiring, cleaning corroded connectors, or refilling or replacing transmission fluid.

7. How much does it cost to repair the P0985 code on a 2008 Toyota Camry?

The cost varies, but replacing a shift solenoid can range from $150 to $400, while wiring repairs could cost $50 to $200 depending on the extent of damage.

8. Can low transmission fluid cause the P0985 code?

Yes, low or degraded transmission fluid can cause improper solenoid operation, leading to the P0985 code.

9. Is it safe to reset the P0985 code without repairs?

Resetting the code without addressing the underlying issue is not recommended, as the problem may persist and cause further damage.

10. Do I need a mechanic to fix the P0985 code in my 2008 Toyota Camry?

While minor issues like low transmission fluid can be resolved at home, diagnosing and repairing wiring or solenoids may require professional expertise.