P0982 2008 Toyota Camry Code - Shift Solenoid 'D' Control Circuit Low Valve S4
Quick Answer
Shifting from 1st to 5th is performed in combination with “ON’ and “OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the Engine Control Module (ECM). Common causes include Shift Solenoid Valve S4, Line pressure solenoid valve S4 harness is open or shorted, Line pressure solenoid valve S4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0982 2008 Toyota Camry indicates Shift Solenoid 'D' Control Circuit Low Valve S4.
- Common causes
- Common causes include Shift Solenoid Valve S4, Line pressure solenoid valve S4 harness is open or shorted, Line pressure solenoid valve S4 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0982 2008 Toyota Camry Description
What are the Possible Causes of the DTC P0982 2008 Toyota Camry?
- Shift Solenoid Valve S4
- Line pressure solenoid valve S4 harness is open or shorted
- Line pressure solenoid valve S4 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0982 2008 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0982 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0982 2008 Toyota Camry code?
Need more information on how to fix the P0982 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0982 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0982 2008 Toyota Camry Code
1. What does the OBDII code P0982 mean on a 2008 Toyota Camry?
P0982 indicates a problem with the Shift Solenoid 'D' Control Circuit (Valve S4), specifically that the circuit voltage is too low.
2. What are the common symptoms of a P0982 code in a 2008 Toyota Camry?
Symptoms may include harsh or erratic shifting, the transmission stuck in one gear, poor fuel economy, and the check engine light being illuminated.
3. What causes the P0982 code to appear in a Toyota Camry?
Common causes include a faulty Shift Solenoid 'D' (Valve S4), damaged wiring or connectors in the solenoid circuit, a malfunctioning transmission control module (TCM), or low transmission fluid.
4. How do I diagnose the P0982 code in my 2008 Toyota Camry?
Start by checking the transmission fluid level and condition. Then inspect the wiring and connectors for damage or corrosion. Finally, test the solenoid and the TCM for proper operation using a multimeter or scan tool.
5. Can I drive my 2008 Toyota Camry with a P0982 code?
Driving with a P0982 code is not recommended, as it can cause further damage to the transmission and affect vehicle performance.
6. How do I fix the P0982 code on my 2008 Toyota Camry?
Repairs may involve replacing the faulty shift solenoid, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the TCM if necessary.
7. Is low transmission fluid a possible cause of the P0982 code?
Yes, low or dirty transmission fluid can contribute to solenoid circuit issues, so it’s important to check and address fluid levels and condition.
8. What tools are needed to troubleshoot the P0982 code?
You’ll need a scan tool or OBDII code reader, a multimeter for testing electrical components, and basic hand tools for inspecting and repairing wiring or connectors.
9. How much does it cost to repair a P0982 code in a 2008 Toyota Camry?
The repair cost can vary, but replacing a shift solenoid typically costs $150–$400, while wiring repairs or TCM replacement may cost more depending on labor rates and parts.
10. Can a bad TCM cause the P0982 code?
Yes, a malfunctioning transmission control module can cause improper voltage to the shift solenoid circuit, triggering the P0982 code.
Discuss the causes and fixes for P0982 2008 Toyota Camry OBDII Code
Code P0982 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
