P0980 ACURA - Shift Solenoid Valve 'C' Open
P0980 ACURA Possible Causes
- Faulty Shift Solenoid 'C'
- Shift Solenoid 'C' harness is open or shorted
- Shift Solenoid 'C' circuit poor electrical connection
How do I fix code P0980 ACURA
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0980 ACURA code
Labor: 1.0The cost of diagnosing the P0980 ACURA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P0980 ACURA Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of power
- Transmission shifting problems
P0980 Acura DescriptionWhen shift solenoid valves A, B, C, D, and E are turned ON, the hydraulic pressure circuit opens. The hydraulic pressure circuit supplies/discharges hydraulic pressure to/from each clutch according to the combination of the ON/OFF status of the shift solenoid valves. The Powertrain Control Module (PCM) commands the driver circuit to turn on the shift solenoid valve. The circuit diagnoses malfunctions such as a circuit short or open, and sends back a return signal during the PCM's command. When the return signal does not match the PCM command to turn OFF the shift solenoid valve, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
P0980 ACURA More InformationNeed more information on how to fix the P0980 ACURA code?
Get Access to Factory Service Manuals
Need more help?Get the P0980 Acura code diagnosed by a professional: Find a repair shop in your area
P0980 ACURA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0980 Acura code? Have you replaced any parts?
Any information is appreciated. Thanks