| All About OBDII Engine Codes
AutoCodes - Buick - P0977 Buick

P0977 Buick Code - Shift Solenoid 'B' Open Or Short To Power

- Code Popularity: 1,414 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By - Updated Aug 05, 2022
Share on Facebook   Share on Twitter   Share on Linkedin

|Code P0977 Buick Possible Causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty Transmission Control Solenoid Valve
  • Transmission Control Solenoid Valve harness is open or shorted
  • Transmission Control Solenoid Valve circuit poor electrical connection

|How do I Fix the Code P0977 Buick?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Buick have Safety Recalls? → Check here

|What is the Cost to Diagnose the Code P0977 Buick?

Labor: 1.0

The cost of diagnosing the P0977 Buick code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are Code P0977 Buick Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|Code P0977 Buick Description

The shift solenoid 2 is part of the control solenoid valve assembly which has no serviceable parts. The shift solenoid 2 is a normally closed ON/OFF solenoid and is controlled by the Transmission Control Module through a low side driver. When the shift solenoid 2 is energized, shift solenoid 2 fluid pressure is directed to the clutch select valve 3. Power to the shift solenoid 2 is supplied by the Transmission Control Module through a high-side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected, the high-side driver will reset. The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an internal high voltage electrical malfunction of the shift solenoid 2 control circuit when the shift solenoid 2 is commanded ON for 2 seconds.

OBDII Code P0977 Buick - Shift Solenoid 'B' Open Or Short To Power -
P0977 Buick Code - Shift Solenoid 'B' Open Or Short To Power

|Need More Information on the P0977 Buick Code?

Need more information on how to fix the P0977 Buick code? Get Access to Factory Service Manuals

|Need Help with the P0977 Buick Code?

Get the P0977 Buick code diagnosed by a professional: Find a repair shop in your area

|Code P0977 Buick comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0977 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks