P0976 Scion Code - Shift Solenoid 'B' Control Circuit Low
Quick Answer
The Engine Control Module (ECM) commands gear shifts by turning the shift solenoid valves "ON/OFF". Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'B' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0976 Scion indicates Shift Solenoid 'B' Control Circuit Low.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'B' valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0976 Scion Description
What are the Possible Causes of the DTC P0976 Scion?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'B' valve
- Shift solenoid 'B' valve harness or connectors
- Shift solenoid 'B' valve circuit is open or shorted
How to Fix the DTC P0976 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0976 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0976 Scion code?
Need more information on how to fix the P0976 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0976 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0976 Scion Code
What does the OBDII code P0976 mean for a Scion?
Code P0976 indicates a low voltage issue in the control circuit for shift solenoid 'B', which helps regulate transmission fluid flow for gear changes.
What are the symptoms of code P0976 in a Scion?
Symptoms may include harsh or delayed shifting, failure to shift into certain gears, decreased fuel efficiency, and the illumination of the check engine light.
What causes the P0976 code in a Scion?
Common causes include a faulty shift solenoid 'B', damaged wiring or connectors in the circuit, transmission fluid contamination, or a malfunctioning transmission control module (TCM).
How can I diagnose code P0976 in a Scion?
Diagnosis typically involves checking the transmission fluid condition, inspecting the wiring and connectors for damage, testing the shift solenoid 'B' for proper operation, and scanning the TCM for additional codes.
Can driving with code P0976 damage my Scion?
Yes, driving with this code can lead to further transmission damage, reduced performance, and increased wear on internal components. It’s best to address the issue promptly.
How do you fix the P0976 code in a Scion?
Repairs may include replacing the shift solenoid 'B', repairing damaged wiring or connectors, flushing or replacing contaminated transmission fluid, or reprogramming/replacing the TCM.
What tools are needed to fix code P0976?
Common tools include an OBDII scanner, multimeter, transmission fluid testing kit, and basic hand tools for inspecting and repairing wiring and solenoids.
How much does it cost to fix the P0976 code in a Scion?
Costs vary depending on the severity of the issue. Replacing a shift solenoid typically ranges from $200-$400, while wiring repairs or TCM replacement may increase costs.
Can low transmission fluid cause code P0976?
Yes, insufficient or contaminated transmission fluid can lead to improper solenoid operation, triggering this code. Checking fluid levels should be part of the diagnostic process.
Do I need to reset the code after repairs?
Yes, after completing repairs, use an OBDII scanner to clear the code and verify that it doesn’t return during a test drive.
Discuss the causes and fixes for P0976 Scion OBDII Code
Code P0976 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
