P0976 DODGE - Shift Solenoid 'B' Control Circuit Low
P0976 DODGE Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'B' valve
- Shift solenoid 'B' valve harness or connectors
- Shift solenoid 'B' valve circuit is open or shorted
How do I fix code P0976 DODGE?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the P0976 DODGE code
Labor: 1.0The cost of diagnosing the P0976 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P0976 DODGE DescriptionThe Powertrain Control Module (PCM) controls the ground signal for shift solenoid B to control the solenoid ON or OFF, according to transaxle and vehicle operation. When the solenoid is OFF, filtered line pressure to the solenoid is exhausted. When energized (ON), the exhaust port is blocked, stopping the exhaust of line pressure through the solenoid, and directing it into the solenoid B passage. Solenoid B fluid pressure is then fed to the 4-3 manual downshift valve and the 3-2 manual downshift valve.
More InformationNeed more information on how to fix the P0976 DODGE code?
Get Access to Factory Service Manuals
Need more help?Get the P0976 Dodge code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0976 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks