P0976 2020 Honda CR-V Code - Shift Solenoid Valve 'B' Circuit Low
Quick Answer
Shift Solenoid Valve 'B' controls the drain circuit close/open commanded by the Powertrain Control Module (PCM) ON/OFF commands. Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0976 2020 Honda CR-V indicates Shift Solenoid Valve 'B' Circuit Low.
- Common causes
- Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0976 2020 Honda CR-V Description
What are the Possible Causes of the DTC P0976 2020 Honda CR-V?
- Faulty CVT Clutch Pressure Control Solenoid Valve 'B'
- CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted
- CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0976 2020 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0976 2020 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0976 2020 Honda CR-V code?
Need more information on how to fix the P0976 2020 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0976 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0976 2020 Honda CR-V Code
1. What does the OBDII code P0976 mean on a 2020 Honda CR-V?
The code P0976 indicates a "Shift Solenoid Valve 'B' Circuit Low," meaning there's a problem with the electrical circuit controlling the shift solenoid valve 'B' in the transmission.
2. What are the common symptoms of P0976 in a 2020 Honda CR-V?
Typical symptoms include difficulty shifting gears, transmission slipping, decreased fuel efficiency, or the vehicle going into limp mode. The check engine light may also illuminate.
3. What causes the P0976 code in a 2020 Honda CR-V?
Common causes include a faulty shift solenoid valve 'B,' damaged or corroded wiring or connectors, low transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2020 Honda CR-V with a P0976 code?
While the vehicle may still be drivable, ignoring the issue could lead to further transmission damage. It's best to address the problem as soon as possible.
5. How do I diagnose a P0976 code on a 2020 Honda CR-V?
Start by checking the transmission fluid level and quality, inspecting the wiring and connectors for damage, and testing the shift solenoid valve 'B' for proper function using a multimeter.
6. How can I fix the P0976 code on my 2020 Honda CR-V?
Repairs may include replacing the faulty shift solenoid valve 'B,' repairing or replacing damaged wiring or connectors, refilling or changing the transmission fluid, or reprogramming the TCM if necessary.
7. How much does it cost to fix a P0976 code on a 2020 Honda CR-V?
Repair costs can vary, but replacing a shift solenoid typically ranges from $150 to $400, including parts and labor. Wiring repairs or TCM reprogramming may add to the cost.
8. What transmission fluid should I use for a 2020 Honda CR-V to prevent P0976?
Use Honda-approved ATF, such as Honda Genuine Automatic Transmission Fluid, to ensure proper lubrication and operation of the transmission components.
9. Could a dead battery cause the P0976 code in a 2020 Honda CR-V?
A dead or weak battery is unlikely to directly cause P0976 but could contribute to electrical issues that might affect transmission performance.
10. Will resetting the check engine light fix the P0976 code in a 2020 Honda CR-V?
Resetting the light may temporarily clear the code, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P0976 2020 Honda CR-V OBDII Code
Code P0976 2020 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
