P0976 2018 Honda CR-V Code - Shift Solenoid Valve 'B' Circuit Low
Quick Answer
Shift Solenoid Valve 'B' controls the drain circuit close/open commanded by the Powertrain Control Module (PCM) ON/OFF commands. Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0976 2018 Honda CR-V indicates Shift Solenoid Valve 'B' Circuit Low.
- Common causes
- Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0976 2018 Honda CR-V Description
What are the Possible Causes of the DTC P0976 2018 Honda CR-V?
- Faulty CVT Clutch Pressure Control Solenoid Valve 'B'
- CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted
- CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0976 2018 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0976 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0976 2018 Honda CR-V code?
Need more information on how to fix the P0976 2018 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0976 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0976 2018 Honda CR-V Code
What does the OBD-II code P0976 mean on a 2018 Honda CR-V?
The code P0976 indicates a problem with the Shift Solenoid Valve 'B' Circuit, specifically a low voltage condition.
What are the symptoms of code P0976 in a 2018 Honda CR-V?
Symptoms may include harsh or delayed shifting, transmission slipping, failure to shift gears, or the transmission stuck in one gear.
What causes the P0976 code in a 2018 Honda CR-V?
Common causes include a faulty shift solenoid valve 'B', damaged wiring or connectors in the circuit, or issues with the transmission control module (TCM).
Can driving with the P0976 code damage my transmission?
Yes, driving with this code can lead to transmission damage over time if the shifting issues are not addressed promptly.
How is code P0976 diagnosed?
A mechanic will use a scan tool to inspect the code, check electrical connections, test the shift solenoid valve, and possibly measure circuit voltage or resistance.
Does the P0976 code require immediate repair?
Yes, it’s recommended to address this code promptly to avoid further transmission problems or unsafe driving conditions.
How do you fix the P0976 code on a 2018 Honda CR-V?
Repairs may involve replacing the shift solenoid valve 'B,' fixing damaged wiring or connectors, or reprogramming or replacing the TCM.
How much does it cost to repair the P0976 code?
Repair costs can vary but typically range from $200 to $500 depending on whether the solenoid, wiring, or TCM needs replacement.
Can low transmission fluid cause the P0976 code?
Low or dirty transmission fluid can contribute to solenoid issues, so checking and replacing the fluid may help resolve the problem.
Will clearing the P0976 code solve the issue permanently?
Clearing the code will only temporarily remove the warning; the underlying issue must be repaired to prevent the code from reappearing.
Discuss the causes and fixes for P0976 2018 Honda CR-V OBDII Code
Code P0976 2018 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
