P0976 2018 Chevrolet Silverado Code - Shift Solenoid 'B' Short To Ground
Quick Answer
The shift solenoid 2 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0976 2018 Chevrolet Silverado indicates Shift Solenoid 'B' Short To Ground.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0976 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0976 2018 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
How to Fix the DTC P0976 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0976 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0976 2018 Chevrolet Silverado code?
Need more information on how to fix the P0976 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0976 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0976 2018 Chevrolet Silverado Code
1. What does the OBDII code P0976 mean for a 2018 Chevrolet Silverado?
Code P0976 indicates that there is a short to ground in the circuit controlling Shift Solenoid 'B' in the transmission.
2. What are common symptoms of code P0976 in a 2018 Chevrolet Silverado?
Symptoms may include harsh or erratic shifting, transmission stuck in one gear, poor acceleration, or the Check Engine Light turning on.
3. What causes the P0976 code to appear in a 2018 Chevrolet Silverado?
Common causes include damaged wiring or connectors, a short circuit, a faulty shift solenoid, or issues with the transmission control module (TCM).
4. How can I confirm the presence of code P0976 in my Silverado?
Use an OBDII scanner to retrieve stored trouble codes. If P0976 is present, inspect the transmission wiring and solenoids for visible damage.
5. Can driving with code P0976 damage my Silverado's transmission?
Yes, continued driving with this code can cause further damage to the transmission and lead to more costly repairs.
6. How do I fix code P0976 on my 2018 Chevrolet Silverado?
Repairs may include replacing the Shift Solenoid 'B,' repairing damaged wiring, or replacing the transmission control module if necessary.
7. How much does it typically cost to repair code P0976 on a Silverado?
Repair costs vary but may range from $200 to $500 for parts and labor, depending on the severity of the issue and whether solenoids or wiring need replacement.
8. Can a dirty transmission fluid cause code P0976?
While not a direct cause, dirty or contaminated transmission fluid can exacerbate solenoid issues and should be checked during diagnosis.
9. Do I need to reset the Check Engine Light after fixing code P0976?
Yes, after completing repairs, use an OBDII scanner to clear the code and reset the Check Engine Light.
10. Is code P0976 common in the 2018 Chevrolet Silverado?
This code is not extremely common but may occur due to electrical issues or wear and tear in the transmission system over time.
Discuss the causes and fixes for P0976 2018 Chevrolet Silverado OBDII Code
Code P0976 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
