P0976 2017 Honda CR-V Code - Shift Solenoid Valve 'B' Circuit Low
Quick Answer
Shift Solenoid Valve 'B' controls the drain circuit close/open commanded by the Powertrain Control Module (PCM) ON/OFF commands. Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0976 2017 Honda CR-V indicates Shift Solenoid Valve 'B' Circuit Low.
- Common causes
- Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0976 2017 Honda CR-V Description
What are the Possible Causes of the DTC P0976 2017 Honda CR-V?
- Faulty CVT Clutch Pressure Control Solenoid Valve 'B'
- CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted
- CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0976 2017 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0976 2017 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0976 2017 Honda CR-V code?
Need more information on how to fix the P0976 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0976 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0976 2017 Honda CR-V Code
1. What does the OBDII code P0976 mean for a 2017 Honda CR-V?
P0976 indicates a problem with the Shift Solenoid Valve 'B' Circuit Low, meaning the transmission is not receiving the expected electrical signal to control shifting.
2. What are common symptoms of the P0976 code in a 2017 Honda CR-V?
Symptoms may include harsh or delayed shifting, transmission slipping, failure to shift gears, or the Check Engine Light turning on.
3. What causes the P0976 code in a 2017 Honda CR-V?
Common causes include a faulty shift solenoid valve, damaged wiring or connectors, low transmission fluid, or issues with the transmission control module (TCM).
4. How is the P0976 code diagnosed in a 2017 Honda CR-V?
A mechanic will typically use an OBDII scanner, inspect wiring and connectors, check the shift solenoid valve, and verify proper transmission fluid levels.
5. Can I drive my 2017 Honda CR-V with the P0976 code?
Driving with this code may lead to further transmission damage and unsafe driving conditions. It's best to have it repaired promptly.
6. How can I fix the P0976 code on my 2017 Honda CR-V?
Repairs may include replacing the shift solenoid valve, repairing damaged wiring or connectors, refilling or flushing transmission fluid, or addressing issues with the TCM.
7. How much does it cost to repair the P0976 code on a 2017 Honda CR-V?
The cost varies depending on the issue, but replacing a shift solenoid may range from $200 to $500, excluding labor, while wiring repairs or TCM replacement may cost more.
8. Can low transmission fluid cause the P0976 code in a 2017 Honda CR-V?
Yes, insufficient or contaminated transmission fluid can impact solenoid function and trigger the P0976 code.
9. How do I check the shift solenoid valve for the P0976 code on a 2017 Honda CR-V?
The shift solenoid valve can be tested using a multimeter to check for electrical continuity and inspected for physical damage or debris.
10. Is the P0976 code specific to the 2017 Honda CR-V?
No, the P0976 code can appear in various vehicles with automatic transmissions, but the exact repair steps may vary by make and model.
Discuss the causes and fixes for P0976 2017 Honda CR-V OBDII Code
Code P0976 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
