P0976 2016 Honda CR-V Code - Shift Solenoid Valve 'B' Circuit Low
Quick Answer
Shift Solenoid Valve 'B' controls the drain circuit close/open commanded by the Powertrain Control Module (PCM) ON/OFF commands. Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0976 2016 Honda CR-V indicates Shift Solenoid Valve 'B' Circuit Low.
- Common causes
- Common causes include Faulty CVT Clutch Pressure Control Solenoid Valve 'B', CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted, CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0976 2016 Honda CR-V Description
What are the Possible Causes of the DTC P0976 2016 Honda CR-V?
- Faulty CVT Clutch Pressure Control Solenoid Valve 'B'
- CVT Clutch Pressure Control Solenoid Valve 'B' harness is open or shorted
- CVT Clutch Pressure Control Solenoid Valve 'B' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0976 2016 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0976 2016 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0976 2016 Honda CR-V code?
Need more information on how to fix the P0976 2016 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0976 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0976 2016 Honda CR-V Code
What does the OBDII code P0976 mean on a 2016 Honda CR-V?
P0976 indicates a problem with the Shift Solenoid Valve 'B' Circuit, specifically that the voltage is lower than expected.
What are the common symptoms of code P0976 in a 2016 Honda CR-V?
Symptoms may include delayed or harsh shifting, failure to shift gears, the transmission stuck in one gear, or the check engine light turning on.
What causes the P0976 code in a 2016 Honda CR-V?
Possible causes include a faulty shift solenoid 'B,' damaged wiring or connectors in the solenoid circuit, transmission fluid issues, or a malfunctioning transmission control module (TCM).
Can I drive my 2016 Honda CR-V with the P0976 code?
Driving with this code is not recommended, as it may cause further damage to the transmission or lead to unsafe driving conditions due to shifting issues.
How is the P0976 code diagnosed?
A technician will use a scan tool to confirm the code, inspect wiring and connectors for damage, check the shift solenoid's resistance, and possibly perform a transmission fluid inspection.
How do you fix the P0976 code on a 2016 Honda CR-V?
Repairs may involve replacing the shift solenoid 'B,' repairing damaged wiring or connectors, cleaning or replacing transmission fluid, or reprogramming or replacing the TCM if needed.
What does the shift solenoid 'B' do in a 2016 Honda CR-V?
The shift solenoid 'B' controls the flow of transmission fluid to engage specific gears, enabling smooth shifting in the automatic transmission.
How much does it cost to repair the P0976 code in a 2016 Honda CR-V?
Repair costs vary but can range from $150 to $400 for solenoid replacement, with additional costs if wiring repairs or TCM replacement are required.
Can low transmission fluid cause the P0976 code in a Honda CR-V?
Yes, low or dirty transmission fluid can lead to improper solenoid operation and trigger the P0976 code.
Will clearing the P0976 code fix the problem?
Clearing the code will turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0976 2016 Honda CR-V OBDII Code
Code P0976 2016 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
