AutoCodes – Acura – P0974 Acura

P0974 Acura Code - Shift Solenoid Valve 'A' Open

Quick Answer

When shift solenoid valves A, B, C, D, and E are turned ON, the hydraulic pressure circuit opens. Common causes include Faulty Shift Solenoid Valve 'A', Shift Solenoid Valve 'A' harness is open or shorted, Shift Solenoid Valve 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0974 Acura indicates Shift Solenoid Valve 'A' Open.
Common causes: Common causes include Faulty Shift Solenoid Valve 'A', Shift Solenoid Valve 'A' harness is open or shorted, Shift Solenoid Valve 'A' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,307

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0974 Acura Description

When shift solenoid valves A, B, C, D, and E are turned ON, the hydraulic pressure circuit opens. The hydraulic pressure circuit supplies/discharges hydraulic pressure to/from each clutch according to the combination of the ON/OFF status of the shift solenoid valves. The Powertrain Control Module (PCM) commands the driver circuit to turn on the shift solenoid valve. The circuit diagnoses malfunctions such as a circuit short or open, and sends back a return signal during the PCM's command. When the return signal does not match the PCM command to turn ON the shift solenoid valve, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0974 Acura - Shift Solenoid Valve 'A' Open - AutoCodes.com — P0974 Acura Code - Shift Solenoid Valve 'A' Open

What does this mean?

What are the Possible Causes of the DTC P0974 Acura?

Faulty Shift Solenoid Valve 'A'
Shift Solenoid Valve 'A' harness is open or shorted
Shift Solenoid Valve 'A' circuit poor electrical connection

How to Fix the DTC P0974 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0974 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0974 Acura code?

Need more information on how to fix the P0974 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0974 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0974 Acura Code

No Frequently Asked Questions about P0974 Acura Code found.

Discuss the causes and fixes for P0974 Acura OBDII Code

Submit a New Comment

Javier
Date: April 30, 2022 at 6:00 am

P0974 p0980 u0107 p2769 p0780 p0747
What can I do to fix have no replaced only cleaned and one internal valve conector C is broken it drives but 2 min later it has no power it slows down to a stop I must turn off motor and turn on to move again please help 06 msg Acura

Reply to Comment