P0969 GMC - Pressure Control Solenoid Valve 3 Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3    What is this?
Table of contents

P0969 GMC Possible Causes

  • Faulty Pressure Control Solenoid Valve 3
  • Pressure Control Solenoid Valve 3 harness is open or shorted
  • Pressure Control Solenoid Valve 3 circuit poor electrical connection

How do I fix code P0969 GMC?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

Cost of diagnosing the P0969 GMC code

Labor: 1.0

The cost of diagnosing the P0969 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0969 GMC Description

The clutch pressure control (PC) solenoid 3 is part of the control solenoid valve assembly which has no serviceable components. The normally high clutch PC solenoid 3 regulates and directs oil pressure to the R1/4-5-6 regulator valve. Increasing clutch PC solenoid 3 pressure increases pressure to the low and reverse clutch or 4-5-6 clutch, depending on the position of the clutch select valve. The transmission control module (TCM) PC Solenoid 3 low side driver varies current to the solenoid. Decreasing the current to clutch PC solenoid 3 increases oil pressure by closing off the solenoid exhaust port. Increasing the current to the clutch PC solenoid 3 decreases oil pressure by opening the exhaust port. Clutch PC solenoid 3 power is supplied by the TCM through a high side driver (HSD). The HSD protects the circuit and components from excessive current flow. If an excessive current flow is detected, the HSD will turn OFF. When the fault is corrected, the HSD will reset.
OBDII Code P0969 Gmc - Pressure Control Solenoid Valve 3 Performance - AutoCodes.com

More Information

Need more information on how to fix the P0969 GMC code?
Get Access to Factory Service Manuals

Need more help?

Get the P0969 Gmc code diagnosed by a professional: Find a repair shop in your area

Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0969 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧