P0967 BUICK - Clutch Pressure Control Solenoid 2 Control Circuit High Voltage
P0967 BUICK Possible Causes
- Faulty Clutch Pressure Control Solenoid 2
- Clutch Pressure Control Solenoid 2 harness is open or shorted
- Clutch Pressure Control Solenoid 2 circuit poor electrical connection
First diagnose P0967 BUICK code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0967 BUICK code
Labor: 1.0The cost of diagnosing the P0967 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P0967 BUICK Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0967 Buick DescriptionThe clutch Pressure Control (PC) solenoid 2 is part of the control solenoid (w/body and TCM) valve assembly and is not serviced separately. The Transmission Control Module (TCM) supplies 12 volts to the clutch PC solenoid 2 on the high side driver 2 circuit. The TCM control the PC solenoid 2 through the clutch PC solenoid 2 control circuit. The normally high clutch PC solenoid 2 flows fluid to the 3-5-R clutch when commanded OFF and exhausts fluid when commanded ON. The clutch PC 2 regulates the transmission fluid pressure to the 3-5-R clutch.
P0967 BUICK More InformationNeed more information on how to fix the P0967 BUICK code?
Get Access to Factory Service Manuals
Need more help?Get the P0967 Buick code diagnosed by a professional: Find a repair shop in your area
P0967 BUICK CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0967 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks