P0967 2014 GMC Sierra Code - Pressure Control Solenoid Valve 2 Control Circuit High Voltage
Quick Answer
The pressure control solenoid 2 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid, Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0967 2014 GMC Sierra indicates Pressure Control Solenoid Valve 2 Control Circuit High Voltage.
- Common causes
- Common causes include Low transmission fluid, Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0967 2014 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an open or short to voltage on the clutch pressure control solenoid 2 control circuit, for 1 s.
What are the Possible Causes of the DTC P0967 2014 GMC Sierra?
- Low transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness is open or shorted
- Control Solenoid Valve Assembly circuit poor electrical connection
How to Fix the DTC P0967 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0967 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0967 2014 GMC Sierra code?
Need more information on how to fix the P0967 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0967 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0967 2014 GMC Sierra Code
What does the OBDII code P0967 indicate on a 2014 GMC Sierra?
The code P0967 indicates that the Pressure Control Solenoid "B" Control Circuit is experiencing high voltage in your 2014 GMC Sierra. This solenoid is part of the transmission's hydraulic system that controls the pressure.
What are common symptoms of the P0967 code in a 2014 GMC Sierra?
Symptoms of the P0967 code may include erratic transmission shifts, transmission slipping, decreased fuel efficiency, a transmission that may go into limp mode, and the Check Engine Light turning on.
What can cause the P0967 code to appear on a 2014 GMC Sierra?
Possible causes for the P0967 code include a faulty pressure control solenoid, issues with the transmission control module, wiring problems like shorts or opens in the solenoid circuit, or low transmission fluid levels.
How can I diagnose the P0967 code in my 2014 GMC Sierra?
Diagnosis should start with checking the transmission fluid level and condition. Then, use a multimeter to check for proper voltage and ground at the pressure control solenoid. Inspecting the wiring and connectors for damage, corrosion, or disconnection is also crucial. A scan tool may be necessary to monitor solenoid operation and verify the issue.
What are the repair steps for fixing the P0967 code on a 2014 GMC Sierra?
Repair steps might include replacing the pressure control solenoid if it's faulty, repairing or replacing damaged wiring or connectors, or changing the transmission fluid if it's contaminated or low. In some cases, reprogramming or replacing the transmission control module may be necessary.
Is it safe to drive my 2014 GMC Sierra with the P0967 code?
Driving with the P0967 code can lead to more serious issues like transmission failure. It is advisable to address the problem as soon as possible to avoid further damage and ensure safe driving conditions.
Can a faulty battery or alternator cause the P0967 code in a 2014 GMC Sierra?
While a faulty battery or alternator is less likely to directly cause the P0967 code, they can contribute to voltage irregularities that might affect the transmission control system. It’s a good idea to check these as part of a thorough diagnosis.
How does a technician verify that the P0967 repair was successful in a 2014 GMC Sierra?
After repairs, a technician will clear the code from the vehicle's computer and take the vehicle for a test drive to ensure that the transmission is functioning properly and the Check Engine Light does not return. Additionally, they might use a scan tool to confirm that the solenoid is operating within the manufacturer's specifications.
Discuss the causes and fixes for P0967 2014 GMC Sierra OBDII Code
Code P0967 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
