AutoCodes – Honda – P0963 2019 Honda CR-V

P0963 2019 Honda CR-V Code - CVT Drive Pulley Pressure Control Valve Circuit High

Quick Answer

The Continuously Variable Transmission (CVT) drive pulley pressure control solenoid valve controls hydraulic pressure to the drive pulley. Common causes include Faulty CVT Drive Pulley Pressure Control Solenoid Valve, CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted, CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0963 2019 Honda CR-V indicates CVT Drive Pulley Pressure Control Valve Circuit High.
Common causes: Common causes include Faulty CVT Drive Pulley Pressure Control Solenoid Valve, CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted, CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 207

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0963 2019 Honda CR-V Description

The Continuously Variable Transmission (CVT) drive pulley pressure control solenoid valve controls hydraulic pressure to the drive pulley. The CVT drive pulley pressure control solenoid valve is controlled by duty cycle output. The spool in the CVT drive pulley pressure control solenoid valve moves the valve according to the current and produces hydraulic pressure in proportion to the current. The Powertrain Control Module (PCM) measures the current that passes through the CVT drive pulley pressure control solenoid valve and uses feedback control to compensate for the difference between the measured current and the commanded one. If the measured current is not equal to the duty cycle command, the PCM detects a malfunction (open, short to ground) and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0963 2019 Honda CR-V - CVT Drive Pulley Pressure Control Valve Circuit High - AutoCodes.com — P0963 2019 Honda CR-V Code - CVT Drive Pulley Pressure Control Valve Circuit High

What does this mean?

What are the Possible Causes of the DTC P0963 2019 Honda CR-V?

Faulty CVT Drive Pulley Pressure Control Solenoid Valve
CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted
CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0963 2019 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0963 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0963 2019 Honda CR-V code?

Need more information on how to fix the P0963 2019 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0963 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0963 2019 Honda CR-V Code

1. What does the OBDII code P0963 mean on a 2019 Honda CR-V?

P0963 indicates a high circuit voltage issue with the CVT drive pulley pressure control valve, which regulates transmission fluid pressure for the continuously variable transmission (CVT).

2. What are the common symptoms of code P0963 in a 2019 Honda CR-V?

Symptoms may include transmission slipping, harsh or erratic shifting, reduced fuel efficiency, a lit check engine light, and possible vehicle limp mode.

3. What causes the P0963 code to appear on a 2019 Honda CR-V?

The code can be triggered by a faulty pressure control solenoid, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or low/contaminated CVT fluid.

4. Can driving with a P0963 code damage my 2019 Honda CR-V?

Driving with this code for an extended period can cause further damage to the CVT transmission and lead to costly repairs. Itâ€™s best to address the issue promptly.

5. How is the P0963 code diagnosed in a 2019 Honda CR-V?

A mechanic will use a scan tool to confirm the code, inspect the wiring and connectors for damage, check the transmission fluid level and condition, and test the pressure control solenoid for proper operation.

6. What repairs are commonly needed for a P0963 code in a 2019 Honda CR-V?

Common repairs include replacing the drive pulley pressure control solenoid, repairing or replacing damaged wiring or connectors, flushing and refilling the CVT fluid, or reprogramming or replacing the TCM.

7. How much does it cost to fix the P0963 code on a 2019 Honda CR-V?

Repair costs vary, but replacing the pressure control solenoid may cost between $200-$400, while wiring repairs or TCM replacement could increase the cost.

8. Can low CVT fluid cause the P0963 code on a 2019 Honda CR-V?

Yes, low or contaminated CVT fluid can contribute to this code by affecting the performance of the pressure control solenoid.

9. How do I reset the P0963 code after repairs on my 2019 Honda CR-V?

You can reset the code using an OBDII scan tool, but ensure the underlying issue is fixed to prevent the code from returning.

10. Is the P0963 code common for the 2019 Honda CR-V?

While not extremely common, it can occur due to wear and tear in the CVT system or issues with the solenoid or electrical connections. Regular maintenance can help prevent it.