P0932 Code - Hydraulic Pressure Sensor Circuit
Quick Answer
Line pressure is electronically controlled by the Transmission Control System (TCM) and is measured by the Line Pressure Sensor (LPS). Common causes include Faulty Hydraulic Pressure Sensor, Hydraulic Pressure Sensor harness is open or shorted, Hydraulic Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0932 indicates Hydraulic Pressure Sensor Circuit.
- Common causes
- Common causes include Faulty Hydraulic Pressure Sensor, Hydraulic Pressure Sensor harness is open or shorted, Hydraulic Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0932 Description
What are the Possible Causes of the DTC P0932?
- Faulty Hydraulic Pressure Sensor
- Hydraulic Pressure Sensor harness is open or shorted
- Hydraulic Pressure Sensor circuit poor electrical connection
How to Fix the DTC P0932?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0932 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0932 code?
Need more information on how to fix the P0932 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0932 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0932 Chrysler — Hydraulic Pressure Sensor Circuit
- P0932 Dodge — Hydraulic Pressure Sensor Circuit
- P0932 Jeep — Hydraulic Pressure Sensor Circuit
Frequently Asked Questions about P0932 Code
1. What are the common symptoms of OBDII code P0932 (Hydraulic Pressure Sensor Circuit)?
- Common symptoms include issues with shifting gears, harsh shifting, transmission slippage, and in some cases, the vehicle may go into limp mode.
2. What are the possible causes of OBDII code P0932?
- The code P0932 can be caused by a faulty hydraulic pressure sensor, damaged wiring or connectors in the sensor circuit, low transmission fluid levels, or a malfunctioning transmission control module.
3. How serious is OBDII code P0932?
- OBDII code P0932 should be addressed promptly as it can lead to significant transmission problems if left unresolved. Ignoring the issue may result in further damage to the transmission system.
4. How can I diagnose OBDII code P0932?
- Diagnosing OBDII code P0932 involves using a scan tool to retrieve the code, checking the transmission fluid level and condition, inspecting the wiring and connectors related to the hydraulic pressure sensor, and testing the sensor itself.
5. Can I continue driving with OBDII code P0932?
- It is not recommended to continue driving with OBDII code P0932 present, as it can cause further damage to the transmission system. It is advised to address the issue as soon as possible.
6. How can OBDII code P0932 be repaired?
- Repairing OBDII code P0932 typically involves replacing the faulty hydraulic pressure sensor, repairing or replacing damaged wiring or connectors, ensuring proper transmission fluid levels, and resetting the fault code.
7. Is it possible to reset OBDII code P0932 without fixing the underlying issue?
- While you can clear the fault code temporarily, it is not recommended to do so without addressing the root cause of OBDII code P0932. The issue will likely reappear if the underlying problem is not fixed.
8. Can low transmission fluid cause OBDII code P0932?
- Yes, low transmission fluid levels can cause OBDII code P0932 to trigger, as the hydraulic pressure sensor relies on proper fluid levels to function correctly. It is essential to check and maintain the proper fluid levels.
9. How much does it cost to repair OBDII code P0932?
- The cost of repairing OBDII code P0932 can vary depending on the cause of the issue, the extent of the repair needed, and labor rates in your area. It is recommended to consult with a professional technician for an accurate estimate.
10. Are there any preventive measures to avoid OBDII code P0932?
- Regular maintenance of your vehicle, including checking transmission fluid levels, addressing any leaks promptly, and ensuring the transmission system is in good condition, can help prevent issues that may lead to OBDII code P0932.
Discuss the causes and fixes for P0932 OBDII Code
Code P0932 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
