P092C Code - Gear Shift Lock Solenoid/Actuator Control Circuit 'B' Low
Quick Answer
The Transmission Control Module (TCM) monitors the Gear Shift Lock Solenoid. Common causes include Faulty Gear Shift Lock Solenoid, Gear Shift Lock Solenoid harness is open or shorted, Gear Shift Lock Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P092C indicates Gear Shift Lock Solenoid/Actuator Control Circuit 'B' Low.
- Common causes
- Common causes include Faulty Gear Shift Lock Solenoid, Gear Shift Lock Solenoid harness is open or shorted, Gear Shift Lock Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P092C Description
What are the Possible Causes of the DTC P092C?
- Faulty Gear Shift Lock Solenoid
- Gear Shift Lock Solenoid harness is open or shorted
- Gear Shift Lock Solenoid circuit poor electrical connection
How to Fix the DTC P092C?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P092C code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P092C code?
Need more information on how to fix the P092C code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P092C code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P092C Code
1. What does the OBDII code P092C mean?
P092C indicates a low voltage issue in the control circuit for the Gear Shift Lock Solenoid/Actuator labeled as 'B'.
2. What are the common symptoms of a P092C code?
Symptoms may include difficulty shifting gears, the shift lock mechanism not releasing, or the vehicle being stuck in park.
3. What causes the P092C code to appear?
Common causes include wiring issues, a faulty shift lock solenoid/actuator, a blown fuse, or a malfunctioning transmission control module (TCM).
4. Can I still drive my car with a P092C code?
Driving may be restricted if the vehicle is stuck in park or unable to shift gears properly, which poses safety concerns.
5. How do I diagnose the P092C code?
Start by inspecting the wiring and connectors for damage, test the shift lock solenoid for proper operation, and check for adequate voltage in the circuit.
6. How do I fix a P092C code?
Repairs may involve replacing damaged wires, the shift lock solenoid/actuator, or addressing issues with the TCM as needed.
7. Can a dead battery cause the P092C code?
Yes, a weak or dead battery can lead to low voltage in the circuit, potentially triggering this code.
8. Does the P092C code require professional repair?
While basic wiring checks can be done at home, diagnosing and replacing the shift lock solenoid or TCM may require professional assistance.
9. What tools are needed to troubleshoot a P092C code?
A multimeter, an OBDII scanner, and basic hand tools are typically needed for diagnostics and repair.
10. Will clearing the code with a scanner fix the P092C issue?
Clearing the code may temporarily reset the system, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P092C OBDII Code
Code P092C comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
