AutoCodesNissan – P0882 Nissan

P0882 Nissan Code - Transmission Control Module Power Input Signal Low

Quick Answer

When the power supply to the Transmission Control Module (TCM) is cut “OFF”, for example because the battery is removed, and the self-diagnostics memory function stops, malfunction is detected. Common causes include Low battery power, Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0882 Nissan indicates Transmission Control Module Power Input Signal Low.
Common causes
Common causes include Low battery power, Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 25,576
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 03, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0882 Nissan Description

When the power supply to the Transmission Control Module (TCM) is cut “OFF”, for example because the battery is removed, and the self-diagnostics memory function stops, malfunction is detected.
OBDII Code P0882 Nissan - Transmission Control Module Power Input Signal Low - AutoCodes.com
P0882 Nissan Code - Transmission Control Module Power Input Signal Low

What are the Possible Causes of the DTC P0882 Nissan?

  • Low battery power
  • Faulty Transmission Control Module (TCM)
  • Transmission Control Module (TCM) harness is open or shorted
  • Transmission Control Module (TCM) circuit poor electrical connection

How to Fix the DTC P0882 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0882 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0882 Nissan code?

Need more information on how to fix the P0882 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0882 Nissan code diagnosed by a professional: Find a repair shop in your area

Information for Specific Nissan Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0882 Nissan Code

1. What are the common symptoms of OBDII code P0882 in a Nissan related to the Transmission Control Module Power Input Signal Low?

The common symptoms include issues with shifting gears, transmission not engaging properly, and the vehicle going into limp mode.

2. What are the possible causes of OBDII code P0882 in a Nissan?

The possible causes of this code can be a faulty transmission control module (TCM), damaged wiring or connectors in the TCM circuit, or a weak battery or alternator.

3. How can I diagnose the OBDII code P0882 in my Nissan?

You can diagnose this code by using a diagnostic scanner to read the code, checking the TCM power input signal voltage, inspecting the wiring and connectors for any damage, and testing the battery and alternator.

4. Can I continue driving my Nissan with OBDII code P0882 present?

It is not recommended to continue driving your vehicle with this code present, as it can lead to further transmission issues and potential safety hazards.

5. How can I repair OBDII code P0882 in my Nissan?

To repair this code, you may need to replace the transmission control module, repair any damaged wiring or connectors, and ensure the battery and alternator are functioning properly.

6. Are there any DIY tips for fixing OBDII code P0882 in a Nissan?

While some basic checks like inspecting wiring and connectors can be done DIY, it is recommended to seek professional help for accurate diagnosis and repair of this code.

7. Can a low battery cause OBDII code P0882 in a Nissan?

Yes, a weak battery or alternator can cause insufficient power supply to the transmission control module, triggering the P0882 code.

8. How much does it typically cost to repair OBDII code P0882 in a Nissan?

The cost of repairing this code can vary depending on the exact cause, but it may range from $200 to $800 including parts and labor.

9. Will resetting the OBDII code P0882 in my Nissan make it go away permanently?

Resetting the code may temporarily clear the error, but if the underlying issue causing the code is not fixed, it is likely to reappear.

10. Is it safe to clear the OBDII code P0882 in my Nissan without fixing the issue?

Clearing the code without fixing the underlying problem may temporarily mask the issue, but it can lead to more severe transmission problems and potential safety risks in the long run.

Discuss the causes and fixes for P0882 Nissan OBDII Code

  • my van will lose power everything else works i.e. lights, radio, air, it is even still running and will move very slowly on it's own but when you push on the gas it doesn't do anything. Sometimes it will do this and then after pushing on the gas a few times it will start working right again. Then sometimes it won't and all the guages will jump back and forth and it will die, then when you try to restart it acts like a dead battery. This happened right after I bought it and the car lot I bought it from told me it was the alternator and fixed that and it seemed to fix the problem but now it has started again. Advanced Auto told my husband that the battery was fine. We got this code P0882 so does anyone know what I should do to completely fix this problem.

  • What model and year is your Nissan?

  • My vehicle is a 2006 Nissan Maxima SE automatic 3.5....i did not have any warning signs that my transmission was going to go out at all...Usually gears stall and jerk when the transmission goes out .I was driving my Car w no problems at all when suddenly my car would no longer move and hitting the gas pedal only revved up the engine but I completely lost a power to all gears ...do you believe that the suggestions above are also the prob w my vehicles malfunction? That code did come up when my.mechanic diagnosed it.!

  • My vehicle is a 2006 Nissan Maxima SE automatic 3.5....i did not have any warning signs that my transmission was going to go out at all...Usually gears stall and jerk when the transmission goes out .I was driving my Car w no problems at all when suddenly my car would no longer move and hitting the gas pedal only revved up the engine but I completely lost a power to all gears ...do you believe that the suggestions above are also the prob w my vehicles malfunction? That code did come up when my.mechanic diagnosed it.!

  • do you believe that the suggestions above are also the prob w my vehicles malfunction?


    If you have the P0882 code then you may have a problem with the charging system. You could start by checking the charging system.
    Any other codes?

  • My car is a Nissan maxima 3.5 no check engine light appear could it be the alternator? When I try to start it it looks like the battery when out and then after a while it starts.

  • Unfortunately, bad alternator or battery can cause many codes and symptoms. Have you tested the battery and alternator?

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play