AutoCodes – Generic – P0876

P0876 Code - Transmission Fluid Pressure Sensor/Switch 'D' Circuit Range/Performance

Quick Answer

The Transmission system uses three pressure switches to monitor the fluid pressure in the LR, 2/4, and OD elements. Common causes include Faulty Transmission Fluid Pressure Sensor/Switch 'D', Transmission Fluid Pressure Sensor/Switch 'D' harness is open or shorted, Transmission Fluid Pressure Sensor/Switch 'D' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0876 indicates Transmission Fluid Pressure Sensor/Switch 'D' Circuit Range/Performance.
Common causes: Common causes include Faulty Transmission Fluid Pressure Sensor/Switch 'D', Transmission Fluid Pressure Sensor/Switch 'D' harness is open or shorted, Transmission Fluid Pressure Sensor/Switch 'D' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,071

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 06, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0876 Description

The Transmission system uses three pressure switches to monitor the fluid pressure in the LR, 2/4, and OD elements. The pressure switches are continuously monitored for the correct states in each gear. The 2/4 pressure switch monitors the fluid pressure to the 2/4 clutch to confirm proper operation of the 2/4 solenoid. If the 2/4 pressure switch is identified as closed in P or N, the code will immediately be set and normal operation will be allowed for that given key start. If the problem is identified for 3 successive ignition cycles, the transmission will go into limp-in mode.

OBDII Code P0876 - Transmission Fluid Pressure Sensor/Switch 'D' Circuit Range/Performance - AutoCodes.com — P0876 Code - Transmission Fluid Pressure Sensor/Switch 'D' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0876?

Faulty Transmission Fluid Pressure Sensor/Switch 'D'
Transmission Fluid Pressure Sensor/Switch 'D' harness is open or shorted
Transmission Fluid Pressure Sensor/Switch 'D' circuit poor electrical connection

How to Fix the DTC P0876?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0876 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0876 code?

Need more information on how to fix the P0876 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0876 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P0876 Chrysler — Transmission Fluid Pressure Switch rationality
P0876 Dodge — Transmission Fluid Pressure Switch rationality
P0876 Jeep — Transmission Fluid Pressure Switch rationality

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.