P0873 2010 Toyota Camry Code - Transmission Fluid Pressure Sensor/Switch 'C' Circuit High
Quick Answer
The Automatic Transmission Fluid (ATF) pressure switch No. Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0873 2010 Toyota Camry indicates Transmission Fluid Pressure Sensor/Switch 'C' Circuit High.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0873 2010 Toyota Camry Description
The Diagnostic Trouble Code (DTC) will set if the ATF pressure switch No. 1 ON is detected twice when any of the gears from 1st to 4th engages normally.
What are the Possible Causes of the DTC P0873 2010 Toyota Camry?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly
- ATF Temperature Sensor harness is open or shorted
- ATF Temperature Sensor circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0873 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0873 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0873 2010 Toyota Camry code?
Need more information on how to fix the P0873 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0873 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0873 2010 Toyota Camry Code
1. What does OBDII code P0873 mean on a 2010 Toyota Camry?
P0873 indicates a high voltage issue in the Transmission Fluid Pressure Sensor/Switch 'C' circuit, which monitors hydraulic pressure in the transmission.
2. What are the common symptoms of code P0873 in a 2010 Toyota Camry?
Symptoms may include harsh or erratic shifting, slipping transmission, the vehicle going into limp mode, and the illumination of the check engine light.
3. What causes the P0873 code to appear on a 2010 Toyota Camry?
Common causes include a faulty transmission fluid pressure sensor, damaged wiring or connectors in the sensor circuit, low or dirty transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can low transmission fluid cause the P0873 code?
Yes, low or contaminated transmission fluid can reduce pressure readings and potentially trigger the P0873 code.
5. How do I diagnose the P0873 code on a 2010 Toyota Camry?
Start by checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and using a scan tool to verify sensor readings and circuit voltages.
6. Is it safe to drive with the P0873 code on a 2010 Toyota Camry?
Driving with this code is not recommended, as it can lead to transmission damage or unsafe driving conditions due to erratic shifting.
7. How do I fix the P0873 code on a 2010 Toyota Camry?
Repairs may involve replacing the transmission fluid pressure sensor, repairing or replacing damaged wiring, cleaning connectors, or updating/replacing the transmission control module.
8. How much does it cost to repair the P0873 code on a 2010 Toyota Camry?
Repair costs can vary but typically range from $100 to $400, depending on whether the issue is with the sensor, wiring, or transmission module.
9. Can a faulty transmission fluid pressure sensor cause shifting problems in a 2010 Toyota Camry?
Yes, a malfunctioning sensor can provide inaccurate pressure readings, leading to improper shifting or transmission issues.
10. Will clearing the P0873 code fix the problem permanently?
No, clearing the code without addressing the underlying issue will only temporarily remove the warning. The code will return if the problem persists.
Discuss the causes and fixes for P0873 2010 Toyota Camry OBDII Code
Code P0873 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
