P0872 2011 Toyota Camry Code - Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low
Quick Answer
The Automatic Transmission Fluid (ATF) pressure switch No. Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0872 2011 Toyota Camry indicates Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0872 2011 Toyota Camry Description
The Diagnostic Trouble Code (DTC) will set if the ATF pressure switch No. 1 OFF is detected twice when any of the gears from 1st to 4th engages normally.
What are the Possible Causes of the DTC P0872 2011 Toyota Camry?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly
- ATF Temperature Sensor harness is open or shorted
- ATF Temperature Sensor circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0872 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0872 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0872 2011 Toyota Camry code?
Need more information on how to fix the P0872 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0872 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0872 2011 Toyota Camry Code
1. What does the OBDII code P0872 mean on a 2011 Toyota Camry?
P0872 indicates a "Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low," meaning the ECU detects an unusually low voltage signal from the transmission fluid pressure sensor 'C'.
2. What are the common symptoms of code P0872 in a 2011 Toyota Camry?
Symptoms may include erratic or delayed shifting, slipping transmission, the transmission stuck in a single gear (limp mode), and the check engine light turning on.
3. What causes the P0872 code to appear?
Common causes include a faulty transmission fluid pressure sensor, damaged or corroded wiring or connectors, low transmission fluid levels, or a failing transmission control module (TCM).
4. Can a low transmission fluid level trigger the P0872 code?
Yes, low or contaminated transmission fluid can cause incorrect pressure readings, which may trigger the P0872 code.
5. How do I diagnose the P0872 code on a 2011 Toyota Camry?
Start by inspecting the transmission fluid level and condition. Then check the wiring and connectors for the transmission fluid pressure sensor. Use a multimeter to test the sensor and circuit for proper voltage and resistance.
6. Is it safe to drive with the P0872 code active?
Driving with this code can lead to transmission damage due to improper shifting or low fluid pressure. It's best to address the issue promptly.
7. How do you fix the P0872 code on a 2011 Toyota Camry?
Fixes may include replacing the faulty transmission fluid pressure sensor, repairing damaged wiring or connectors, topping off or replacing transmission fluid, or reprogramming the TCM if needed.
8. How much does it cost to repair the P0872 code?
Repair costs vary but typically range from $100 to $300 for sensor replacement, plus additional charges if wiring repairs or fluid changes are required.
9. Can a faulty TCM cause the P0872 code?
Yes, a malfunctioning TCM can send or interpret incorrect signals, potentially triggering the P0872 code.
10. Will clearing the P0872 code fix the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue will persist until properly diagnosed and repaired.
Discuss the causes and fixes for P0872 2011 Toyota Camry OBDII Code
Code P0872 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
