P0867 JEEP - Transmission Fluid Pressure
P0867 JEEP Possible Causes
- Low / Dirty Transmission Fluid
- Faulty Transmission Fluid Pressure Sensor
- Transmission Fluid Pressure Sensor harness is open or shorted
- Transmission Fluid Pressure Sensor circuit poor electrical connection
First diagnose P0867 JEEP code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0867 JEEP code
Labor: 1.0The cost of diagnosing the P0867 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P0867 JEEP Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0867 Jeep DescriptionThe Transmission Control Module (TCM) continuously monitors actual line pressure and compares it to the desired line pressure. If the difference between actual line pressure and desired line pressure is 10 psi (.7 kg/cm2 ) or greater, DTC P0867 will set. Transmission system will default to open loop line pressure control resulting in a fixed solenoid duty cycle. This duty cycle will change slightly depending on temperature and current gear.
P0867 JEEP More InformationNeed more information on how to fix the P0867 JEEP code?
Get Access to Factory Service Manuals
Need more help?Get the P0867 Jeep code diagnosed by a professional: Find a repair shop in your area
P0867 JEEP CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0867 Jeep code? Have you replaced any parts?
Any information is appreciated. Thanks