P0864 Audi Code - TCM Communication Circuit Range/Performance
Quick Answer
The Engine Control Module (ECM) monitors the Transmission Control Module (TCM). Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0864 Audi indicates TCM Communication Circuit Range/Performance.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0864 Audi Description
What are the Possible Causes of the DTC P0864 Audi?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0864 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0864 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0864 Audi code?
Need more information on how to fix the P0864 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0864 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0864 Audi Code
1. What does the OBDII code P0864 mean for an Audi?
P0864 indicates a problem with the Transmission Control Module (TCM) communication circuit, specifically a range or performance issue.
2. What are the common symptoms of code P0864 in an Audi?
Symptoms may include erratic shifting, transmission stuck in limp mode, poor acceleration, or the check engine light turning on.
3. What causes the P0864 code to appear in an Audi?
Common causes include a faulty TCM, damaged wiring or connectors, issues with the CAN bus network, or low transmission fluid levels.
4. Can a malfunctioning TCM cause code P0864?
Yes, a malfunctioning or failing TCM can disrupt communication and trigger code P0864.
5. Is it safe to drive an Audi with the P0864 code?
Driving with this code can lead to further transmission damage or unsafe driving conditions; it’s recommended to address the issue promptly.
6. How can I diagnose the P0864 code in my Audi?
Start by scanning the vehicle with an OBDII tool, inspecting TCM wiring and connectors for damage, and checking transmission fluid levels.
7. Can low transmission fluid cause code P0864?
Yes, insufficient fluid can affect transmission performance and potentially trigger communication errors.
8. What repairs are required for an Audi with code P0864?
Repairs may include fixing or replacing damaged wiring, cleaning or replacing connectors, updating or replacing the TCM, or addressing transmission fluid issues.
9. Can a software update resolve the P0864 code in an Audi?
In some cases, a software update for the TCM may resolve communication issues if no physical damage is found.
10. How much does it cost to fix the P0864 code in an Audi?
Costs vary depending on the issue, ranging from $100 for minor wiring repairs to over $1,000 for TCM replacement.
Discuss the causes and fixes for P0864 Audi OBDII Code
-
Hello
my Audi Q7 does not start anymore and I buy a new module of the blow it
starts and stops immediately I have diagnosed and it gives me a code of
P0864 what to do -
You may have to have the dealer reprogram the transmission control unit for you.
-
OK donc si je comprends bien il faut juste la reprogrammer très bien merci et en passant il est donc clair que c'est lui qui coupe le démarrage après 5 seconde ?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
