P0826 2009 Nissan Rogue Code - Manual Mode Switch Circuit
Quick Answer
Manual mode switch is installed in shift control device. Common causes include Faulty Manual mode select switch (Built into control device, shifter), Faulty Manual mode position select switch (Built into control device, shifter), Faulty Control Device (Shifter). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0826 2009 Nissan Rogue indicates Manual Mode Switch Circuit.
- Common causes
- Common causes include Faulty Manual mode select switch (Built into control device, shifter), Faulty Manual mode position select switch (Built into control device, shifter), Faulty Control Device (Shifter).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0826 2009 Nissan Rogue Description
TCM sends the switch signals to combination meter via CAN communication line. Then manual mode switch position is indicated on the shift position indicator.
What are the Possible Causes of the DTC P0826 2009 Nissan Rogue?
- Faulty Manual mode select switch (Built into control device, shifter)
- Faulty Manual mode position select switch (Built into control device, shifter)
- Faulty Control Device (Shifter)
- Control Device harness is open or shorted
- Control Device circuit poor electrical connection
How to Fix the DTC P0826 2009 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0826 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0826 2009 Nissan Rogue code?
Need more information on how to fix the P0826 2009 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0826 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0826 2009 Nissan Rogue Code
1. What is OBDII code P0826 on a 2009 Nissan Rogue?
The OBDII code P0826 on a 2009 Nissan Rogue refers to the Manual Mode Switch Circuit.
2. What are the common symptoms of OBDII code P0826 in a 2009 Nissan Rogue?
Common symptoms of OBDII code P0826 in a 2009 Nissan Rogue may include issues with the transmission shifting, the inability to switch between automatic and manual modes, or the vehicle getting stuck in one gear.
3. What are the possible causes of OBDII code P0826 in a 2009 Nissan Rogue?
Possible causes of OBDII code P0826 in a 2009 Nissan Rogue include a faulty manual mode switch, damaged wiring or connectors in the circuit, or a malfunctioning transmission control module.
4. How can I diagnose OBDII code P0826 in my 2009 Nissan Rogue?
Diagnosing OBDII code P0826 in a 2009 Nissan Rogue typically involves using an OBDII scanner to retrieve the code, inspecting the manual mode switch and its wiring for any visible damage, and testing the circuit for continuity.
5. Can I still drive my 2009 Nissan Rogue with OBDII code P0826?
It is not recommended to drive your 2009 Nissan Rogue with OBDII code P0826, as it can lead to transmission issues and potentially cause further damage. It's best to have the issue diagnosed and repaired promptly.
6. How can I repair OBDII code P0826 in my 2009 Nissan Rogue?
Repairing OBDII code P0826 in a 2009 Nissan Rogue may involve replacing the manual mode switch, repairing any damaged wiring or connectors, or reprogramming the transmission control module. It's recommended to consult a professional mechanic for proper repair.
7. Will resetting the OBDII code P0826 in my 2009 Nissan Rogue make it go away?
Resetting the OBDII code P0826 in a 2009 Nissan Rogue may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to return. It's important to diagnose and repair the root cause of the problem.
8. How much does it cost to fix OBDII code P0826 in a 2009 Nissan Rogue?
The cost to fix OBDII code P0826 in a 2009 Nissan Rogue can vary depending on the specific cause of the issue, the parts needed for repair, and the labor rates of the mechanic. It's best to get a diagnostic and repair estimate from a trusted automotive professional.
9. Can a DIY enthusiast fix OBDII code P0826 in a 2009 Nissan Rogue?
While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P0826 in a 2009 Nissan Rogue, it's recommended to consult a professional mechanic for this particular issue due to its complexity and potential impact on the transmission system.
10. How long does it take to repair OBDII code P0826 in a 2009 Nissan Rogue?
The time it takes to repair OBDII code P0826 in a 2009 Nissan Rogue can vary depending on the exact cause of the issue, the availability of parts, and the expertise of the mechanic. In general, the repair process may take a few hours to a full day.
Discuss the causes and fixes for P0826 2009 Nissan Rogue OBDII Code
Code P0826 2009 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
