P0815 2009 Ford Fusion Code - Upshift Switch Circuit Fault
Quick Answer
The Transmission Control Module (TCM) monitors the Upshift Switch Circuit signal. Common causes include Faulty Upshift Switch, Upshift Switch harness is open or shorted, Upshift Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0815 2009 Ford Fusion indicates Upshift Switch Circuit Fault.
- Common causes
- Common causes include Faulty Upshift Switch, Upshift Switch harness is open or shorted, Upshift Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0815 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0815 2009 Ford Fusion?
- Faulty Upshift Switch
- Upshift Switch harness is open or shorted
- Upshift Switch circuit poor electrical connection
How to Fix the DTC P0815 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0815 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0815 2009 Ford Fusion code?
Need more information on how to fix the P0815 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0815 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0815 2009 Ford Fusion Code
1. What does the OBDII code P0815 mean on a 2009 Ford Fusion?
The P0815 code indicates an "Upshift Switch Circuit Fault," meaning there is an issue with the electrical circuit responsible for the upshift switch in the transmission system.
2. What are the common symptoms of code P0815 in a 2009 Ford Fusion?
Symptoms may include difficulty shifting gears, transmission stuck in one gear, illuminated check engine light, or reduced vehicle performance.
3. What causes the P0815 code to appear on a 2009 Ford Fusion?
Common causes include a faulty upshift switch, damaged or corroded wiring, poor electrical connections, or a malfunctioning transmission control module (TCM).
4. How do I diagnose the P0815 code on my 2009 Ford Fusion?
Start by inspecting the upshift switch and its wiring for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit, and scan for related codes.
5. Can I drive my 2009 Ford Fusion with the P0815 code?
While the vehicle may still be drivable, continuing to drive with this code can lead to further transmission or electrical issues. It’s best to address the problem promptly.
6. How do I fix the P0815 code on a 2009 Ford Fusion?
Repairs may include replacing the upshift switch, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/repairing the TCM if necessary.
7. How much does it cost to repair the P0815 code on a 2009 Ford Fusion?
The repair cost depends on the underlying issue, ranging from $50 for wiring repairs to $300 or more for replacing the upshift switch or reprogramming the TCM.
8. Can a faulty transmission control module cause the P0815 code?
Yes, a malfunctioning TCM can cause the P0815 code by failing to properly communicate with the upshift switch or other transmission components.
9. Will resetting the check engine light fix the P0815 code on a 2009 Ford Fusion?
Resetting the light may temporarily clear the code, but the underlying issue must be resolved to prevent the code from returning.
10. How can I prevent the P0815 code in my 2009 Ford Fusion?
Regular maintenance, such as inspecting and cleaning electrical connections and checking for wiring damage, can help prevent the P0815 code from occurring.
Discuss the causes and fixes for P0815 2009 Ford Fusion OBDII Code
Code P0815 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
