P080A 2015 GMC Sierra Code - Clutch Position Not Learned
Quick Answer
The Clutch Pedal Position (CPP) sensor is a three-wire sensor, connected to a 5 V reference circuit, a low reference circuit, and a signal circuit. Common causes include Faulty Clutch Pedal Position (CPP) Sensor, Clutch Pedal Position Sensor harness is open or shorted, Clutch Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P080A 2015 GMC Sierra indicates Clutch Position Not Learned.
- Common causes
- Common causes include Faulty Clutch Pedal Position (CPP) Sensor, Clutch Pedal Position Sensor harness is open or shorted, Clutch Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P080A 2015 GMC Sierra Description
What are the Possible Causes of the DTC P080A 2015 GMC Sierra?
- Faulty Clutch Pedal Position (CPP) Sensor
- Clutch Pedal Position Sensor harness is open or shorted
- Clutch Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P080A 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P080A 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P080A 2015 GMC Sierra code?
Need more information on how to fix the P080A 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P080A 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P080A 2015 GMC Sierra Code
1. What does the OBDII code P080A mean on a 2015 GMC Sierra?
P080A indicates "Clutch Position Not Learned," meaning the vehicle's control module has not successfully calibrated the clutch pedal position.
2. What are the common symptoms of a P080A code?
Symptoms may include difficulty shifting gears, the engine failing to start, or the transmission operating improperly.
3. What causes the P080A code on a 2015 GMC Sierra?
Possible causes include a faulty clutch position sensor, incomplete clutch pedal calibration, wiring issues, or a malfunctioning transmission control module (TCM).
4. How do you fix a P080A code on a GMC Sierra?
Perform a clutch position sensor relearn procedure using a diagnostic scan tool, check for sensor or wiring issues, and replace faulty components if necessary.
5. Can I drive with a P080A code on my GMC Sierra?
Driving with this code is not recommended, as it may lead to transmission problems or difficulty starting the vehicle.
6. How do I perform a clutch position sensor relearn procedure?
Use a compatible scan tool to initiate the relearn process, following the on-screen prompts, or consult the vehicle’s service manual for specific steps.
7. What tools are needed to diagnose a P080A code?
You’ll need an OBDII scanner capable of advanced diagnostics and communication with the TCM to diagnose and fix the issue.
8. Can a P080A code be caused by low transmission fluid?
No, low transmission fluid does not directly cause this code, but proper fluid levels are critical for overall transmission performance.
9. How much does it cost to fix a P080A code on a GMC Sierra?
Repair costs vary depending on the issue; a clutch position sensor replacement typically costs $100–$300, while a diagnostic scan or relearn procedure may cost less.
10. Will disconnecting the battery clear the P080A code?
Disconnecting the battery may temporarily clear the code, but it will likely return unless the underlying issue is resolved.
Discuss the causes and fixes for P080A 2015 GMC Sierra OBDII Code
Code P080A 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
